SP2GDZ-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP2GDZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1772661650	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	0 count/10m	7 count/10m
1772659250	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	0 count/10m	4 count/10m
1772658050	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	0 count/10m	7 count/10m
1772656850	0.01 Rx Erlang	0.01 Tx Erlang	5 count/10m	0 count/10m	4 count/10m
1772655650	0.01 Rx Erlang	0.01 Tx Erlang	7 count/10m	0 count/10m	6 count/10m
1772654450	0.01 Rx Erlang	0.01 Tx Erlang	10 count/10m	0 count/10m	6 count/10m
1772653274	0.01 Rx Erlang	0.01 Tx Erlang	5 count/10m	0 count/10m	4 count/10m
1772649650	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	0 count/10m	4 count/10m
1772647250	0.01 Rx Erlang	0.01 Tx Erlang	6 count/10m	0 count/10m	6 count/10m
1772646050	0.01 Rx Erlang	0 Tx Erlang	7 count/10m	0 count/10m	4 count/10m
1772643650	0.01 Rx Erlang	0.01 Tx Erlang	13 count/10m	0 count/10m	7 count/10m
1772641250	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	0 count/10m	4 count/10m
1772640050	0.02 Rx Erlang	0.01 Tx Erlang	29 count/10m	0 count/10m	8 count/10m
1772638850	0.03 Rx Erlang	0.01 Tx Erlang	31 count/10m	0 count/10m	11 count/10m
1772637650	0.02 Rx Erlang	0.01 Tx Erlang	27 count/10m	1 count/10m	12 count/10m
1772636450	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	0 count/10m	6 count/10m
1772635250	0.01 Rx Erlang	0.01 Tx Erlang	5 count/10m	0 count/10m	4 count/10m
1772634050	0.01 Rx Erlang	0 Tx Erlang	5 count/10m	0 count/10m	4 count/10m
1772632850	0.01 Rx Erlang	0.01 Tx Erlang	5 count/10m	0 count/10m	5 count/10m
1772631650	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	0 count/10m	4 count/10m
1772630450	0.01 Rx Erlang	0 Tx Erlang	5 count/10m	0 count/10m	4 count/10m
1772629250	0.03 Rx Erlang	0.01 Tx Erlang	30 count/10m	0 count/10m	7 count/10m
1772628050	0.02 Rx Erlang	0.01 Tx Erlang	13 count/10m	0 count/10m	5 count/10m
1772626850	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	0 count/10m	6 count/10m
1772625650	0.01 Rx Erlang	0.01 Tx Erlang	5 count/10m	0 count/10m	4 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)