DM0ETB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DM0ETB. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RX Avg 30m*	TX Avg 30m*	RX Count 30m*	TX Count 30m*
1776631139	0 erlang	0 erlang	0 receptions	1 transmissions
1776629339	0 erlang	0.01 erlang	0 receptions	3 transmissions
1776627539	987014.68 erlang	0.01 erlang	0 receptions	2 transmissions
1776625739	0 erlang	0 erlang	0 receptions	1 transmissions
1776623939	0 erlang	0 erlang	0 receptions	1 transmissions
1776622139	0 erlang	0 erlang	0 receptions	1 transmissions
1776620339	0.17 erlang	0.26 erlang	34 receptions	9 transmissions
1776618539	987010.21 erlang	0.07 erlang	2 receptions	19 transmissions
1776616739	987008.45 erlang	0.01 erlang	0 receptions	8 transmissions
1776614939	1974014.67 erlang	0.04 erlang	1 receptions	5 transmissions
1776605785	987002.37 erlang	0.02 erlang	0 receptions	3 transmissions
1776603985	987001.94 erlang	0.05 erlang	0 receptions	8 transmissions
1776602185	0 erlang	0 erlang	0 receptions	1 transmissions
1776600385	0 erlang	0.03 erlang	0 receptions	7 transmissions
1776598585	986998.53 erlang	0.02 erlang	0 receptions	6 transmissions
1776596785	0 erlang	0 erlang	0 receptions	1 transmissions
1776594985	0 erlang	0 erlang	0 receptions	1 transmissions
1776593185	0 erlang	0.02 erlang	0 receptions	6 transmissions
1776591385	0 erlang	0 erlang	0 receptions	1 transmissions
1776589585	0 erlang	0 erlang	0 receptions	1 transmissions
1776587785	0 erlang	0 erlang	0 receptions	2 transmissions
1776585985	0 erlang	0.04 erlang	0 receptions	6 transmissions
1776584185	0 erlang	0 erlang	0 receptions	1 transmissions
1776582385	0 erlang	0 erlang	0 receptions	1 transmissions
1776580587	0 erlang	0.01 erlang	0 receptions	3 transmissions

*Used Equation Coefficients:

RX Avg 30m: 0, 0.00392, 0

TX Avg 30m: 0, 0.00392, 0

RX Count 30m: 0, 1, 0

TX Count 30m: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)