9W2YIE-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W2YIE-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1788613287	0 Pkt	16 Pkt	-43 dBm	0.1 V
1788613252	6442 Pkt	0 Pkt	0 dBm	0 V
1788612346	0 Pkt	40 Pkt	-44 dBm	0.1 V
1788612313	6442 Pkt	0 Pkt	0 dBm	0 V
1788611378	0 Pkt	35 Pkt	-43 dBm	0.1 V
1788611345	6442 Pkt	0 Pkt	0 dBm	0 V
1788610418	0 Pkt	24 Pkt	-43 dBm	0.1 V
1788610381	6442 Pkt	0 Pkt	0 dBm	0 V
1788609471	0 Pkt	25 Pkt	-44 dBm	0.1 V
1788609437	6442 Pkt	0 Pkt	0 dBm	0 V
1788608523	0 Pkt	24 Pkt	-42 dBm	0.1 V
1788608490	6442 Pkt	0 Pkt	0 dBm	0 V
1788607574	0 Pkt	33 Pkt	-43 dBm	0.1 V
1788607542	6442 Pkt	0 Pkt	0 dBm	0 V
1788606621	0 Pkt	75 Pkt	-41 dBm	0.1 V
1788606587	6442 Pkt	0 Pkt	0 dBm	0 V
1788605622	0 Pkt	22 Pkt	-42 dBm	0.1 V
1788605589	6442 Pkt	0 Pkt	0 dBm	0 V
1788604677	0 Pkt	25 Pkt	-43 dBm	0.1 V
1788604644	6442 Pkt	0 Pkt	0 dBm	0 V
1788603725	0 Pkt	4 Pkt	-44 dBm	0.1 V
1788603692	6442 Pkt	0 Pkt	0 dBm	0 V
1788602795	0 Pkt	23 Pkt	-44 dBm	0.1 V
1788602762	6442 Pkt	0 Pkt	0 dBm	0 V
1788601846	0 Pkt	33 Pkt	-42 dBm	0.1 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)