NY3PD-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object NY3PD-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1785113688	13 Pkts	12 Pkts	2 Pkts	27 C
1785112488	16 Pkts	15 Pkts	5 Pkts	27 C
1785111288	19 Pkts	19 Pkts	5 Pkts	27 C
1785110088	14 Pkts	12 Pkts	2 Pkts	27 C
1785108904	20 Pkts	20 Pkts	8 Pkts	27 C
1785107688	23 Pkts	22 Pkts	6 Pkts	27 C
1785106488	16 Pkts	9 Pkts	5 Pkts	27 C
1785105288	10 Pkts	3 Pkts	0 Pkts	27 C
1785104088	1 Pkts	0 Pkts	0 Pkts	29 C
1785102888	2 Pkts	1 Pkts	0 Pkts	29 C
1785101689	5 Pkts	0 Pkts	0 Pkts	30 C
1785099070	15 Pkts	14 Pkts	4 Pkts	30 C
1784764966	37 Pkts	7 Pkts	8 Pkts	29 C
1784763782	26 Pkts	0 Pkts	8 Pkts	28 C
1784762582	31 Pkts	0 Pkts	14 Pkts	29 C
1784761382	32 Pkts	0 Pkts	10 Pkts	28 C
1784760182	16 Pkts	0 Pkts	7 Pkts	29 C
1784758982	22 Pkts	0 Pkts	6 Pkts	29 C
1784757782	35 Pkts	0 Pkts	12 Pkts	30 C
1784756582	38 Pkts	6 Pkts	8 Pkts	30 C
1784593113	16 Pkts	15 Pkts	4 Pkts	29 C
1784591913	22 Pkts	19 Pkts	5 Pkts	29 C
1784590713	18 Pkts	18 Pkts	4 Pkts	30 C
1784589513	24 Pkts	24 Pkts	7 Pkts	30 C
1784588313	25 Pkts	23 Pkts	6 Pkts	30 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)