K2DLL-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K2DLL-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784710683	15.08 Volt	1130 Pkt	20 Pkt	88 Pcnt
1784709783	15 Volt	1140 Pkt	20 Pkt	88 Pcnt
1784708882	15 Volt	1150 Pkt	20 Pkt	88 Pcnt
1784707080	15.08 Volt	1180 Pkt	30 Pkt	87 Pcnt
1784706179	15.08 Volt	1180 Pkt	30 Pkt	87 Pcnt
1784705278	15.08 Volt	1170 Pkt	30 Pkt	86 Pcnt
1784704379	15.08 Volt	1140 Pkt	30 Pkt	86 Pcnt
1784703477	15.08 Volt	1120 Pkt	20 Pkt	86 Pcnt
1784702575	15.08 Volt	1100 Pkt	20 Pkt	86 Pcnt
1784701674	15.08 Volt	1100 Pkt	30 Pkt	86 Pcnt
1784700773	15.08 Volt	1110 Pkt	30 Pkt	86 Pcnt
1784698972	15.08 Volt	1150 Pkt	30 Pkt	86 Pcnt
1784698072	15.08 Volt	1160 Pkt	20 Pkt	85 Pcnt
1784697170	15.08 Volt	1160 Pkt	30 Pkt	84 Pcnt
1784696270	15.08 Volt	1170 Pkt	30 Pkt	84 Pcnt
1784695369	15 Volt	1140 Pkt	30 Pkt	84 Pcnt
1784694468	15.08 Volt	1150 Pkt	30 Pkt	84 Pcnt
1784693568	15.08 Volt	1150 Pkt	30 Pkt	85 Pcnt
1784692666	15.08 Volt	1140 Pkt	30 Pkt	84 Pcnt
1784691766	15.08 Volt	1160 Pkt	30 Pkt	84 Pcnt
1784690865	15 Volt	1130 Pkt	20 Pkt	84 Pcnt
1784689965	15 Volt	1130 Pkt	20 Pkt	84 Pcnt
1784689062	15.08 Volt	1140 Pkt	20 Pkt	84 Pcnt
1784688162	15.08 Volt	1150 Pkt	20 Pkt	85 Pcnt
1784687260	15.08 Volt	1170 Pkt	30 Pkt	84 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)