KG5TWI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KG5TWI-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1788622075	13.88 Volt	130 Pkt	30 Pkt	89 Pcnt
1788621476	13.88 Volt	120 Pkt	30 Pkt	87 Pcnt
1788620876	13.88 Volt	130 Pkt	30 Pkt	87 Pcnt
1788620275	13.88 Volt	130 Pkt	30 Pkt	87 Pcnt
1788618474	13.88 Volt	120 Pkt	30 Pkt	90 Pcnt
1788617874	13.88 Volt	110 Pkt	30 Pkt	91 Pcnt
1788617297	13.88 Volt	110 Pkt	30 Pkt	91 Pcnt
1788616674	13.88 Volt	110 Pkt	30 Pkt	90 Pcnt
1788616074	13.88 Volt	110 Pkt	30 Pkt	89 Pcnt
1788615474	13.88 Volt	110 Pkt	30 Pkt	88 Pcnt
1788614874	13.88 Volt	110 Pkt	30 Pkt	88 Pcnt
1788614274	13.88 Volt	110 Pkt	30 Pkt	86 Pcnt
1788613674	13.88 Volt	120 Pkt	40 Pkt	88 Pcnt
1788613074	13.88 Volt	110 Pkt	30 Pkt	87 Pcnt
1788612474	13.88 Volt	110 Pkt	40 Pkt	86 Pcnt
1788611874	13.88 Volt	100 Pkt	40 Pkt	86 Pcnt
1788611275	13.88 Volt	100 Pkt	40 Pkt	85 Pcnt
1788610675	13.88 Volt	90 Pkt	40 Pkt	85 Pcnt
1788610075	13.88 Volt	100 Pkt	40 Pkt	85 Pcnt
1788609475	12 Volt	90 Pkt	30 Pkt	84 Pcnt
1788608875	13.88 Volt	90 Pkt	30 Pkt	84 Pcnt
1788608275	13.88 Volt	90 Pkt	30 Pkt	81 Pcnt
1788607675	13.88 Volt	90 Pkt	30 Pkt	82 Pcnt
1788607075	13.88 Volt	80 Pkt	30 Pkt	80 Pcnt
1788606475	13.88 Volt	90 Pkt	30 Pkt	80 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)