YU0XBV-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YU0XBV-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1765532245	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	0 count/10m	7 count/10m
1765531045	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	2 count/10m	6 count/10m
1765529845	0.02 Rx Erlang	0.01 Tx Erlang	10 count/10m	4 count/10m	6 count/10m
1765528645	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	2 count/10m	6 count/10m
1765527445	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	2 count/10m	6 count/10m
1765526245	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	1 count/10m	6 count/10m
1765525045	0.01 Rx Erlang	0.01 Tx Erlang	7 count/10m	0 count/10m	7 count/10m
1765523845	0.01 Rx Erlang	0.01 Tx Erlang	7 count/10m	1 count/10m	5 count/10m
1765522645	0.02 Rx Erlang	0.01 Tx Erlang	11 count/10m	2 count/10m	7 count/10m
1765521445	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	2 count/10m	7 count/10m
1765520245	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	2 count/10m	6 count/10m
1765519045	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	2 count/10m	4 count/10m
1765517845	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	1 count/10m	8 count/10m
1765516645	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	1 count/10m	6 count/10m
1765515445	0.02 Rx Erlang	0.01 Tx Erlang	11 count/10m	2 count/10m	7 count/10m
1765514245	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	2 count/10m	6 count/10m
1765513045	0.01 Rx Erlang	0.01 Tx Erlang	10 count/10m	2 count/10m	6 count/10m
1765511845	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	2 count/10m	6 count/10m
1765510645	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	2 count/10m	6 count/10m
1765509445	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	2 count/10m	6 count/10m
1765508245	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	2 count/10m	5 count/10m
1765507045	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	2 count/10m	7 count/10m
1765505845	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	2 count/10m	6 count/10m
1765504649	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	2 count/10m	5 count/10m
1765503445	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	2 count/10m	7 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)