HS2GJW-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS2GJW-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1776690305	0 Pkt	0 Pkt	-80 dBm	14.87 V
1776689681	0 Pkt	0 Pkt	-81 dBm	14.89 V
1776689057	0 Pkt	0 Pkt	-81 dBm	14.87 V
1776688432	0 Pkt	0 Pkt	-81 dBm	14.89 V
1776687808	1 Pkt	0 Pkt	-83 dBm	14.87 V
1776687184	8 Pkt	0 Pkt	-81 dBm	14.89 V
1776686559	17 Pkt	0 Pkt	-83 dBm	14.83 V
1776685935	22 Pkt	0 Pkt	-80 dBm	14.89 V
1776685306	18 Pkt	0 Pkt	-79 dBm	14.87 V
1776684679	69 Pkt	0 Pkt	-83 dBm	14.89 V
1776684048	59 Pkt	0 Pkt	-81 dBm	14.89 V
1776683420	23 Pkt	0 Pkt	-87 dBm	14.87 V
1776682793	1 Pkt	0 Pkt	-81 dBm	14.89 V
1776682169	17 Pkt	0 Pkt	-81 dBm	14.89 V
1776681544	8 Pkt	0 Pkt	-80 dBm	14.87 V
1776680919	8 Pkt	0 Pkt	-79 dBm	14.83 V
1776680294	31 Pkt	0 Pkt	-79 dBm	14.87 V
1776679668	25 Pkt	0 Pkt	-83 dBm	14.87 V
1776679039	25 Pkt	0 Pkt	-84 dBm	14.87 V
1776678410	24 Pkt	0 Pkt	-78 dBm	14.89 V
1776677784	19 Pkt	0 Pkt	-80 dBm	14.87 V
1776677159	12 Pkt	0 Pkt	-84 dBm	14.83 V
1776676532	0 Pkt	0 Pkt	-81 dBm	14.89 V
1776664212	40 Pkt	1 Pkt	-86 dBm	14.87 V
1776663583	28 Pkt	0 Pkt	-88 dBm	14.87 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)