VK4RBM-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RBM-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	BLDTemp*	Batt*	Rx1h*	DeEff%*	RXpkt*
1789951268	12 C	13.86 Volts	42 pkt	56 pkt	50 Spam
1789950367	11.5 C	13.74 Volts	44 pkt	56 pkt	73 Spam
1789949466	11.5 C	13.14 Volts	51 pkt	60 pkt	50 Spam
1789948565	11 C	13.68 Volts	57 pkt	61 pkt	78 Spam
1789947664	11 C	13.26 Volts	59 pkt	62 pkt	52 Spam
1789946763	10.5 C	13.44 Volts	63 pkt	64 pkt	117 Spam
1789945863	10.5 C	13.38 Volts	61 pkt	63 pkt	103 Spam
1789944961	10 C	13.62 Volts	64 pkt	67 pkt	98 Spam
1789944092	10 C	13.14 Volts	67 pkt	70 pkt	101 Spam
1789943160	10 C	12.9 Volts	67 pkt	70 pkt	107 Spam
1789942259	9.5 C	12.78 Volts	66 pkt	70 pkt	110 Spam
1789941358	9.5 C	12.78 Volts	63 pkt	67 pkt	124 Spam
1789940458	9.5 C	12.78 Volts	60 pkt	64 pkt	94 Spam
1789939556	9.5 C	12.78 Volts	62 pkt	65 pkt	106 Spam
1789938655	9.5 C	12.72 Volts	61 pkt	63 pkt	91 Spam
1789937754	9.5 C	12.78 Volts	67 pkt	63 pkt	101 Spam
1789936855	9.5 C	12.78 Volts	71 pkt	63 pkt	110 Spam
1789935954	9 C	12.78 Volts	70 pkt	63 pkt	103 Spam
1789935052	9 C	12.78 Volts	76 pkt	65 pkt	138 Spam
1789933251	9 C	12.84 Volts	38 pkt	67 pkt	110 Spam
1789932349	8.5 C	12.84 Volts	23 pkt	69 pkt	130 Spam
1789932071	8.5 C	12.9 Volts	16 pkt	70 pkt	141 Spam
1789905410	11.5 C	12.9 Volts	44 pkt	66 pkt	77 Spam
1789904507	11.5 C	12.9 Volts	39 pkt	69 pkt	68 Spam
1789903607	12 C	12.9 Volts	38 pkt	68 pkt	69 Spam

*Used Equation Coefficients:

BLDTemp: 0, 0.5, -64

Batt: 0, 0.06, 2.7

Rx1h: 0, 1, 0

DeEff%: 0, 1, 0

RXpkt: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)