SP8IZA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP8IZA-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Tzew*	Twew*	Uzas*	Cisn*	DHT*
1780572534	21.6 stC	23.8 stC	13.35 Volt	991 hPa	20 stC
1780572234	21.3 stC	23.8 stC	13.35 Volt	990.9 hPa	20 stC
1780571933	21 stC	23.8 stC	13.35 Volt	990.9 hPa	20 stC
1780571633	20.8 stC	23.7 stC	13.35 Volt	990.9 hPa	20 stC
1780571332	20.6 stC	23.6 stC	13.35 Volt	991 hPa	19 stC
1780570731	20.6 stC	23.5 stC	13.35 Volt	990.9 hPa	19 stC
1780570431	20.5 stC	23.5 stC	13.33 Volt	990.9 hPa	19 stC
1780570130	20.5 stC	23.4 stC	13.35 Volt	991 hPa	19 stC
1780569830	20.6 stC	23.3 stC	13.35 Volt	991 hPa	19 stC
1780569229	20.2 stC	23.2 stC	13.35 Volt	990.9 hPa	19 stC
1780568928	19.9 stC	23.1 stC	13.35 Volt	990.9 hPa	18 stC
1780568628	19.6 stC	23 stC	13.35 Volt	990.8 hPa	18 stC
1780568327	19.5 stC	22.9 stC	13.35 Volt	990.9 hPa	18 stC
1780567726	19.3 stC	22.9 stC	13.35 Volt	991.1 hPa	18 stC
1780567125	19.4 stC	22.8 stC	13.33 Volt	991.1 hPa	18 stC
1780566825	19.3 stC	22.7 stC	13.33 Volt	991 hPa	18 stC
1780566524	19 stC	22.6 stC	13.35 Volt	991 hPa	18 stC
1780566224	18.8 stC	22.6 stC	13.33 Volt	991 hPa	18 stC
1780565923	18.8 stC	22.6 stC	13.33 Volt	990.9 hPa	17 stC
1780565623	18.8 stC	22.6 stC	13.35 Volt	990.9 hPa	17 stC
1780565322	18.8 stC	22.5 stC	13.35 Volt	990.9 hPa	18 stC
1780565022	18.8 stC	22.4 stC	13.33 Volt	990.9 hPa	17 stC
1780564721	18.6 stC	22.4 stC	13.33 Volt	990.9 hPa	17 stC
1780564421	18.5 stC	22.4 stC	13.33 Volt	990.9 hPa	17 stC
1780564120	18.5 stC	22.4 stC	13.35 Volt	990.9 hPa	17 stC

*Used Equation Coefficients:

Tzew: 0, 0.1, -50

Twew: 0, 0.1, -50

Uzas: 0, 0.025, 0

Cisn: 0, 0.1, 950

DHT: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)