W8VFR-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W8VFR-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1757498438	0.08 Rx Erlang	0.02 Tx Erlang	76 count/10m	2 count/10m	17 count/10m
1757497238	0.08 Rx Erlang	0.02 Tx Erlang	85 count/10m	1 count/10m	14 count/10m
1757496038	0.09 Rx Erlang	0.01 Tx Erlang	85 count/10m	1 count/10m	14 count/10m
1757494838	0.09 Rx Erlang	0.01 Tx Erlang	91 count/10m	2 count/10m	15 count/10m
1757493638	0.09 Rx Erlang	0.01 Tx Erlang	96 count/10m	0 count/10m	15 count/10m
1757492438	0.1 Rx Erlang	0.01 Tx Erlang	94 count/10m	1 count/10m	14 count/10m
1757491238	0.09 Rx Erlang	0.02 Tx Erlang	86 count/10m	0 count/10m	16 count/10m
1757490038	0.1 Rx Erlang	0.02 Tx Erlang	94 count/10m	0 count/10m	16 count/10m
1757488838	0.09 Rx Erlang	0.01 Tx Erlang	85 count/10m	0 count/10m	13 count/10m
1757487638	0.09 Rx Erlang	0.01 Tx Erlang	93 count/10m	0 count/10m	14 count/10m
1757486438	0.1 Rx Erlang	0.01 Tx Erlang	98 count/10m	1 count/10m	14 count/10m
1757485238	0.1 Rx Erlang	0.01 Tx Erlang	92 count/10m	2 count/10m	13 count/10m
1757484038	0.1 Rx Erlang	0.01 Tx Erlang	89 count/10m	1 count/10m	12 count/10m
1757482838	0.09 Rx Erlang	0.01 Tx Erlang	92 count/10m	1 count/10m	13 count/10m
1757481638	0.11 Rx Erlang	0.01 Tx Erlang	99 count/10m	0 count/10m	14 count/10m
1757480438	0.09 Rx Erlang	0.01 Tx Erlang	93 count/10m	5 count/10m	13 count/10m
1757479238	0.08 Rx Erlang	0.01 Tx Erlang	81 count/10m	0 count/10m	11 count/10m
1757478045	0.09 Rx Erlang	0.01 Tx Erlang	95 count/10m	5 count/10m	14 count/10m
1757476838	0.09 Rx Erlang	0.01 Tx Erlang	88 count/10m	10 count/10m	14 count/10m
1757475638	0.11 Rx Erlang	0.01 Tx Erlang	108 count/10m	25 count/10m	12 count/10m
1757474438	0.1 Rx Erlang	0.01 Tx Erlang	91 count/10m	2 count/10m	12 count/10m
1757473238	0.08 Rx Erlang	0.01 Tx Erlang	78 count/10m	3 count/10m	12 count/10m
1757472038	0.09 Rx Erlang	0.01 Tx Erlang	85 count/10m	0 count/10m	12 count/10m
1757470838	0.1 Rx Erlang	0.01 Tx Erlang	91 count/10m	4 count/10m	11 count/10m
1757469638	0.1 Rx Erlang	0.01 Tx Erlang	99 count/10m	7 count/10m	16 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)