VK6KCH-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK6KCH-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	40m_APRS*	CPU*	1838kHz_WSPR*	476kHz_WSPR*	137kHz_WSPR*
1787580555	2 pkts_in_hour	2.11 load	0 decodes	0 decodes	0 decodes
1787580255	1 pkts_in_hour	1.86 load	0 decodes	0 decodes	0 decodes
1787579954	18 pkts_in_hour	1.77 load	10 decodes	0 decodes	0 decodes
1787579655	17 pkts_in_hour	2.02 load	9 decodes	0 decodes	0 decodes
1787579449	17 pkts_in_hour	1.89 load	8 decodes	0 decodes	0 decodes
1787579092	14 pkts_in_hour	2.58 load	7 decodes	0 decodes	0 decodes
1787578750	14 pkts_in_hour	2.08 load	6 decodes	0 decodes	0 decodes
1787578456	12 pkts_in_hour	1.44 load	6 decodes	0 decodes	0 decodes
1787578156	11 pkts_in_hour	2 load	4 decodes	0 decodes	0 decodes
1787577852	9 pkts_in_hour	2.36 load	4 decodes	0 decodes	0 decodes
1787577592	9 pkts_in_hour	1.81 load	2 decodes	0 decodes	0 decodes
1787577292	7 pkts_in_hour	2.33 load	2 decodes	0 decodes	0 decodes
1787576953	5 pkts_in_hour	1.73 load	0 decodes	0 decodes	0 decodes
1787576652	4 pkts_in_hour	1.97 load	0 decodes	0 decodes	0 decodes
1787576355	21 pkts_in_hour	2.13 load	14 decodes	0 decodes	0 decodes
1787576056	19 pkts_in_hour	2.55 load	13 decodes	0 decodes	0 decodes
1787575791	18 pkts_in_hour	1.66 load	11 decodes	0 decodes	0 decodes
1787575494	17 pkts_in_hour	2.47 load	11 decodes	0 decodes	0 decodes
1787575156	17 pkts_in_hour	1.77 load	8 decodes	0 decodes	0 decodes
1787574852	14 pkts_in_hour	2.41 load	7 decodes	0 decodes	0 decodes
1787574553	12 pkts_in_hour	1.8 load	6 decodes	0 decodes	0 decodes
1787574253	9 pkts_in_hour	1.97 load	5 decodes	0 decodes	0 decodes
1787573992	9 pkts_in_hour	2.42 load	3 decodes	0 decodes	0 decodes
1787573693	6 pkts_in_hour	2.39 load	3 decodes	0 decodes	0 decodes
1787573054	1 pkts_in_hour	2 load	0 decodes	0 decodes	0 decodes

*Used Equation Coefficients:

40m_APRS: 0, 1, 0

CPU: 0, 0.015625, 0

1838kHz_WSPR: 0, 1, 0

476kHz_WSPR: 0, 1, 0

137kHz_WSPR: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)