IW0QO-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IW0QO-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1789967944	35 Count	22 Count	3 Count	4.19 VDC	0.2 VDC
1789967041	32 Count	11 Count	1 Count	4.19 VDC	0.2 VDC
1789966138	30 Count	3 Count	0 Count	4.18 VDC	0.2 VDC
1789966128	29 Count	3 Count	0 Count	4.18 VDC	0.2 VDC
1789966099	28 Count	3 Count	0 Count	3.87 VDC	0.18 VDC
1789966067	27 Count	3 Count	0 Count	3.84 VDC	0.2 VDC
1789966058	27 Count	3 Count	0 Count	3.7 VDC	0.14 VDC
1789965879	27 Count	3 Count	0 Count	3.85 VDC	0.2 VDC
1789965854	27 Count	3 Count	0 Count	3.85 VDC	0.2 VDC
1789965844	27 Count	3 Count	0 Count	3.85 VDC	0.2 VDC
1789965834	27 Count	3 Count	0 Count	3.85 VDC	0.2 VDC
1789965771	26 Count	0 Count	0 Count	3.85 VDC	0.2 VDC
1789965761	26 Count	0 Count	0 Count	3.85 VDC	0.18 VDC
1789965751	26 Count	0 Count	0 Count	3.85 VDC	0.2 VDC
1789965741	26 Count	0 Count	0 Count	3.86 VDC	0.2 VDC
1789965735	25 Count	0 Count	0 Count	3.38 VDC	0.14 VDC
1789965611	25 Count	0 Count	0 Count	3.87 VDC	0.2 VDC
1789965601	25 Count	0 Count	0 Count	3.87 VDC	0.2 VDC
1789964458	24 Count	0 Count	0 Count	3.86 VDC	0.2 VDC
1789962657	23 Count	0 Count	0 Count	3.86 VDC	0.2 VDC
1789960857	22 Count	0 Count	0 Count	3.74 VDC	0.14 VDC
1789959056	21 Count	0 Count	0 Count	3.89 VDC	0.2 VDC
1789957258	20 Count	0 Count	0 Count	3.9 VDC	0.18 VDC
1789955455	19 Count	0 Count	0 Count	3.91 VDC	0.2 VDC
1789953654	18 Count	0 Count	0 Count	3.92 VDC	0.16 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)