DL8FBP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL8FBP-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1765533214	1000.7 hPa	17.2 C deg	49.3 %	676 -	0 C deg
1765531397	1000.7 hPa	17.4 C deg	49 %	664 -	0 C deg
1765529587	1000.5 hPa	17.3 C deg	49.1 %	679 -	0 C deg
1765524159	1000.3 hPa	16.6 C deg	49.9 %	698 -	0 C deg
1765522334	1000.1 hPa	16.1 C deg	50.5 %	711 -	0 C deg
1765520498	1000 hPa	16.2 C deg	50.5 %	707 -	0 C deg
1765516882	999.9 hPa	16.3 C deg	50.5 %	690 -	0 C deg
1765515071	999.8 hPa	16.4 C deg	50.5 %	693 -	0 C deg
1765511444	999.3 hPa	16.5 C deg	50.5 %	677 -	0 C deg
1765509604	999.3 hPa	16.6 C deg	50.5 %	672 -	0 C deg
1765493267	1000 hPa	17.5 C deg	50.1 %	628 -	0 C deg
1765480577	1000.4 hPa	17.9 C deg	50 %	603 -	0 C deg
1765476943	1000.5 hPa	17.8 C deg	50.4 %	596 -	0 C deg
1765476932	1000.5 hPa	17.8 C deg	50.4 %	596 -	0 C deg
1765471489	1000.5 hPa	17.9 C deg	50.3 %	633 -	0 C deg
1765466042	1000.5 hPa	18.1 C deg	50.1 %	624 -	0 C deg
1765464225	1000.7 hPa	17.9 C deg	50.3 %	620 -	0 C deg
1765460608	1000.9 hPa	18.1 C deg	50 %	621 -	0 C deg
1765460602	1000.9 hPa	18.1 C deg	50 %	621 -	0 C deg
1765458778	1001 hPa	17.8 C deg	50.4 %	635 -	0 C deg
1765455148	1001.4 hPa	18 C deg	49.9 %	637 -	0 C deg
1765453333	1001.7 hPa	17.6 C deg	50.3 %	637 -	0 C deg
1765447890	1002 hPa	17.4 C deg	50.4 %	645 -	0 C deg
1765438821	1001.7 hPa	17.5 C deg	50.3 %	648 -	0 C deg
1765431568	1000.8 hPa	16.6 C deg	51.9 %	657 -	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)