AD3O-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AD3O-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784716158	13.98 Volt	650 Pkt	140 Pkt	75 Pcnt
1784712379	13.98 Volt	590 Pkt	130 Pkt	74 Pcnt
1784708599	13.9 Volt	590 Pkt	130 Pkt	71 Pcnt
1784704818	13.98 Volt	560 Pkt	120 Pkt	66 Pcnt
1784701037	13.98 Volt	520 Pkt	130 Pkt	67 Pcnt
1784697257	13.9 Volt	500 Pkt	130 Pkt	65 Pcnt
1784693479	13.98 Volt	480 Pkt	120 Pkt	63 Pcnt
1784689700	13.98 Volt	490 Pkt	140 Pkt	65 Pcnt
1784685918	13.98 Volt	570 Pkt	170 Pkt	74 Pcnt
1784682139	13.98 Volt	610 Pkt	190 Pkt	73 Pcnt
1784678358	13.9 Volt	570 Pkt	130 Pkt	68 Pcnt
1784674579	13.98 Volt	570 Pkt	120 Pkt	72 Pcnt
1784670798	13.98 Volt	670 Pkt	170 Pkt	71 Pcnt
1784667026	13.98 Volt	690 Pkt	150 Pkt	75 Pcnt
1784663238	13.98 Volt	690 Pkt	170 Pkt	75 Pcnt
1784659458	13.9 Volt	630 Pkt	160 Pkt	69 Pcnt
1784655679	13.98 Volt	540 Pkt	150 Pkt	60 Pcnt
1784651899	13.98 Volt	510 Pkt	160 Pkt	61 Pcnt
1784648119	13.98 Volt	510 Pkt	140 Pkt	65 Pcnt
1784644338	13.98 Volt	490 Pkt	140 Pkt	64 Pcnt
1784640559	13.98 Volt	490 Pkt	170 Pkt	61 Pcnt
1784636781	13.9 Volt	470 Pkt	180 Pkt	62 Pcnt
1784632999	13.98 Volt	430 Pkt	130 Pkt	61 Pcnt
1784629219	13.98 Volt	390 Pkt	120 Pkt	62 Pcnt
1784625439	13.9 Volt	360 Pkt	120 Pkt	55 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)