DB0LSB-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0LSB-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784683240	16.35 Volt	260 Pkt	100 Pkt	77 Pcnt
1784682639	16.35 Volt	270 Pkt	100 Pkt	79 Pcnt
1784682040	16.05 Volt	260 Pkt	100 Pkt	77 Pcnt
1784681438	16.28 Volt	250 Pkt	110 Pkt	74 Pcnt
1784680838	16.28 Volt	260 Pkt	120 Pkt	75 Pcnt
1784680237	16.35 Volt	280 Pkt	120 Pkt	79 Pcnt
1784679636	16.43 Volt	300 Pkt	130 Pkt	81 Pcnt
1784679036	16.2 Volt	280 Pkt	130 Pkt	80 Pcnt
1784678435	16.28 Volt	270 Pkt	120 Pkt	82 Pcnt
1784677834	16.2 Volt	280 Pkt	130 Pkt	85 Pcnt
1784677235	16.13 Volt	280 Pkt	120 Pkt	85 Pcnt
1784676633	16.2 Volt	260 Pkt	120 Pkt	83 Pcnt
1784676033	16.28 Volt	260 Pkt	130 Pkt	84 Pcnt
1784675432	16.2 Volt	280 Pkt	140 Pkt	86 Pcnt
1784674832	15.98 Volt	290 Pkt	140 Pkt	84 Pcnt
1784674231	16.35 Volt	290 Pkt	130 Pkt	84 Pcnt
1784673630	16.35 Volt	280 Pkt	130 Pkt	85 Pcnt
1784673030	16.2 Volt	280 Pkt	120 Pkt	87 Pcnt
1784672429	16.35 Volt	290 Pkt	130 Pkt	87 Pcnt
1784671829	16.2 Volt	250 Pkt	110 Pkt	76 Pcnt
1784671228	16.28 Volt	210 Pkt	90 Pkt	66 Pcnt
1784670627	16.28 Volt	190 Pkt	90 Pkt	59 Pcnt
1784670027	16.28 Volt	200 Pkt	100 Pkt	57 Pcnt
1784669426	16.35 Volt	190 Pkt	90 Pkt	54 Pcnt
1784668826	16.28 Volt	140 Pkt	70 Pkt	46 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)