9H1US-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9H1US-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1787697464	7 Pkt	30 Pkt	2 Pkt	11.24 Pcnt	74 Pcnt
1787697164	5 Pkt	30 Pkt	0 Pkt	11.24 Pcnt	74 Pcnt
1787696864	5 Pkt	30 Pkt	0 Pkt	11.23 Pcnt	74 Pcnt
1787696564	5 Pkt	40 Pkt	0 Pkt	11.23 Pcnt	74 Pcnt
1787696264	6 Pkt	40 Pkt	0 Pkt	11.24 Pcnt	74 Pcnt
1787695964	5 Pkt	40 Pkt	0 Pkt	11.24 Pcnt	74 Pcnt
1787695664	5 Pkt	40 Pkt	0 Pkt	11.24 Pcnt	74 Pcnt
1787695364	6 Pkt	40 Pkt	1 Pkt	11.24 Pcnt	74 Pcnt
1787695064	5 Pkt	40 Pkt	0 Pkt	11.24 Pcnt	74 Pcnt
1787694764	6 Pkt	40 Pkt	0 Pkt	11.24 Pcnt	74 Pcnt
1787694464	7 Pkt	40 Pkt	1 Pkt	11.24 Pcnt	74 Pcnt
1787694164	7 Pkt	40 Pkt	1 Pkt	11.24 Pcnt	74 Pcnt
1787693864	7 Pkt	40 Pkt	1 Pkt	11.24 Pcnt	74 Pcnt
1787693564	10 Pkt	40 Pkt	2 Pkt	11.24 Pcnt	74 Pcnt
1787693264	7 Pkt	30 Pkt	1 Pkt	11.24 Pcnt	74 Pcnt
1787692964	6 Pkt	30 Pkt	1 Pkt	11.23 Pcnt	74 Pcnt
1787692664	7 Pkt	30 Pkt	1 Pkt	11.23 Pcnt	74 Pcnt
1787692364	8 Pkt	30 Pkt	2 Pkt	11.23 Pcnt	74 Pcnt
1787692064	7 Pkt	30 Pkt	2 Pkt	11.23 Pcnt	74 Pcnt
1787691764	5 Pkt	30 Pkt	0 Pkt	11.23 Pcnt	74 Pcnt
1787691464	5 Pkt	30 Pkt	0 Pkt	11.23 Pcnt	74 Pcnt
1787691164	5 Pkt	30 Pkt	0 Pkt	11.23 Pcnt	74 Pcnt
1787690864	5 Pkt	30 Pkt	0 Pkt	11.23 Pcnt	74 Pcnt
1787690564	6 Pkt	30 Pkt	1 Pkt	11.23 Pcnt	74 Pcnt
1787690264	6 Pkt	30 Pkt	1 Pkt	11.23 Pcnt	74 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)