WC4PEM-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	Rx1h*	Eff1h*
1788571429	26.5 C	14.25 Volt	310 Pkt	1140 Pkt	68 Pcnt
1788571429	26.5 C	14.25 Volt	310 Pkt	1140 Pkt	68 Pcnt
1788571129	26 C	14.25 Volt	310 Pkt	1130 Pkt	68 Pcnt
1788570829	26 C	14.25 Volt	310 Pkt	1130 Pkt	68 Pcnt
1788570829	26 C	14.25 Volt	310 Pkt	1130 Pkt	68 Pcnt
1788570529	26.5 C	14.25 Volt	300 Pkt	1110 Pkt	67 Pcnt
1788570229	27 C	14.25 Volt	300 Pkt	1100 Pkt	66 Pcnt
1788570229	27 C	14.25 Volt	300 Pkt	1100 Pkt	66 Pcnt
1788569929	26 C	14.25 Volt	300 Pkt	1120 Pkt	67 Pcnt
1788569629	26 C	14.25 Volt	300 Pkt	1120 Pkt	67 Pcnt
1788569629	26 C	14.25 Volt	300 Pkt	1120 Pkt	67 Pcnt
1788569329	26.5 C	14.25 Volt	300 Pkt	1110 Pkt	66 Pcnt
1788569029	26.5 C	14.25 Volt	300 Pkt	1120 Pkt	65 Pcnt
1788569029	26.5 C	14.25 Volt	300 Pkt	1120 Pkt	65 Pcnt
1788568729	26 C	14.25 Volt	300 Pkt	1100 Pkt	64 Pcnt
1788568430	25.5 C	14.25 Volt	300 Pkt	1110 Pkt	65 Pcnt
1788568429	25.5 C	14.25 Volt	300 Pkt	1110 Pkt	65 Pcnt
1788568129	26 C	14.25 Volt	300 Pkt	1100 Pkt	64 Pcnt
1788567832	27 C	14.25 Volt	300 Pkt	1110 Pkt	64 Pcnt
1788567829	27 C	14.25 Volt	300 Pkt	1110 Pkt	64 Pcnt
1788567529	26 C	14.25 Volt	310 Pkt	1110 Pkt	64 Pcnt
1788567262	25 C	14.25 Volt	300 Pkt	1110 Pkt	65 Pcnt
1788567262	25 C	14.25 Volt	300 Pkt	1110 Pkt	65 Pcnt
1788566929	26 C	14.25 Volt	300 Pkt	1130 Pkt	66 Pcnt
1788566630	26.5 C	14.18 Volt	300 Pkt	1120 Pkt	66 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)