SQ2CPA-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1780607168	281 Count	410 Count	238 Count	4.06 VDC	0 VDC
1780605370	272 Count	394 Count	230 Count	4.06 VDC	0 VDC
1780603572	264 Count	377 Count	223 Count	4.06 VDC	0 VDC
1780601775	245 Count	351 Count	205 Count	4.06 VDC	0 VDC
1780599976	235 Count	328 Count	196 Count	4.06 VDC	0.66 VDC
1780598178	226 Count	312 Count	188 Count	4.07 VDC	5.3 VDC
1780596380	217 Count	299 Count	180 Count	4.08 VDC	5.54 VDC
1780594581	210 Count	286 Count	174 Count	4.08 VDC	5.56 VDC
1780592783	166 Count	235 Count	131 Count	4.08 VDC	5.56 VDC
1780590984	161 Count	216 Count	127 Count	4.08 VDC	5.56 VDC
1780589186	156 Count	206 Count	123 Count	4.08 VDC	5.56 VDC
1780587388	152 Count	195 Count	120 Count	4.08 VDC	5.56 VDC
1780585589	147 Count	182 Count	116 Count	4.08 VDC	5.56 VDC
1780583791	108 Count	138 Count	78 Count	4.09 VDC	5.56 VDC
1780581993	104 Count	132 Count	75 Count	4.09 VDC	5.56 VDC
1780580196	100 Count	127 Count	72 Count	4.1 VDC	5.58 VDC
1780578400	96 Count	122 Count	69 Count	4.1 VDC	5.56 VDC
1780576602	92 Count	117 Count	66 Count	4.1 VDC	5.56 VDC
1780574804	88 Count	112 Count	63 Count	4.1 VDC	5.56 VDC
1780573006	84 Count	107 Count	60 Count	4.1 VDC	5.56 VDC
1780571209	80 Count	102 Count	57 Count	4.11 VDC	5.58 VDC
1780569412	76 Count	97 Count	54 Count	4.11 VDC	5.58 VDC
1780567615	72 Count	92 Count	51 Count	4.11 VDC	5.56 VDC
1780565819	68 Count	87 Count	48 Count	4.12 VDC	5.56 VDC
1780564020	64 Count	82 Count	45 Count	4.13 VDC	5.56 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)