F1ZUG-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F1ZUG-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784716744	13.73 Volt	140 Pkt	80 Pkt	40 Pcnt
1784716143	13.73 Volt	160 Pkt	80 Pkt	43 Pcnt
1784715542	13.73 Volt	160 Pkt	80 Pkt	44 Pcnt
1784714942	13.73 Volt	140 Pkt	80 Pkt	42 Pcnt
1784714343	13.73 Volt	140 Pkt	80 Pkt	44 Pcnt
1784713744	13.73 Volt	130 Pkt	70 Pkt	44 Pcnt
1784713143	13.73 Volt	110 Pkt	60 Pkt	45 Pcnt
1784712544	13.73 Volt	90 Pkt	50 Pkt	41 Pcnt
1784711942	13.73 Volt	90 Pkt	50 Pkt	42 Pcnt
1784711343	13.73 Volt	80 Pkt	50 Pkt	43 Pcnt
1784710744	13.73 Volt	80 Pkt	50 Pkt	41 Pcnt
1784710143	13.73 Volt	80 Pkt	50 Pkt	39 Pcnt
1784709543	13.73 Volt	90 Pkt	50 Pkt	42 Pcnt
1784708943	13.73 Volt	110 Pkt	60 Pkt	46 Pcnt
1784708343	13.73 Volt	120 Pkt	60 Pkt	45 Pcnt
1784707743	13.73 Volt	130 Pkt	70 Pkt	46 Pcnt
1784707143	13.73 Volt	150 Pkt	70 Pkt	48 Pcnt
1784706543	13.73 Volt	180 Pkt	80 Pkt	50 Pcnt
1784705943	13.73 Volt	180 Pkt	80 Pkt	47 Pcnt
1784705343	13.73 Volt	200 Pkt	90 Pkt	47 Pcnt
1784704743	13.73 Volt	230 Pkt	110 Pkt	47 Pcnt
1784704143	13.73 Volt	260 Pkt	120 Pkt	49 Pcnt
1784703543	13.73 Volt	300 Pkt	140 Pkt	51 Pcnt
1784702944	13.73 Volt	310 Pkt	150 Pkt	51 Pcnt
1784702343	13.73 Volt	350 Pkt	170 Pkt	54 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)