KD5FCQ-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KD5FCQ-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Temp*
1761415926	14.09 Volts	107.05 Deg.F
1761415800	14.09 Volts	107.05 Deg.F
1761415560	14.09 Volts	107.05 Deg.F
1761414484	13.68 Volts	98.25 Deg.F
1761406058	14.09 Volts	93.85 Deg.F
1761405581	14.09 Volts	90.33 Deg.F
1761405459	14.09 Volts	89.45 Deg.F
1761405340	14.09 Volts	87.69 Deg.F
1761405101	13.62 Volts	85.93 Deg.F
1761404851	14.09 Volts	87.69 Deg.F
1761404732	14.09 Volts	85.93 Deg.F
1761404493	14.06 Volts	81.53 Deg.F
1761404374	13.62 Volts	78.89 Deg.F
1761400803	14.06 Volts	78.01 Deg.F
1761400683	13.62 Volts	75.37 Deg.F
1761353288	14.06 Volts	100.89 Deg.F
1761353169	14.06 Volts	100.89 Deg.F
1761353049	14.09 Volts	100.89 Deg.F
1761352692	14.09 Volts	100.01 Deg.F
1761351973	14.06 Volts	97.37 Deg.F
1761351854	14.09 Volts	97.37 Deg.F
1761351615	14.09 Volts	96.49 Deg.F
1761351496	14.06 Volts	95.61 Deg.F
1761351376	14.09 Volts	94.73 Deg.F
1761350897	14.06 Volts	91.21 Deg.F

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.88, -459.67

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)