OE3XIR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3XIR-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	DecEf*
1773143022	14.03 Volt	250 Pkt	80 Pcnt	62 Pcnt
1773143020	14.03 Volt	250 Pkt	80 Pcnt	62 Pcnt
1773142720	14.03 Volt	260 Pkt	80 Pcnt	62 Pcnt
1773142420	14.03 Volt	260 Pkt	80 Pcnt	62 Pcnt
1773142120	14.03 Volt	270 Pkt	81 Pcnt	62 Pcnt
1773141821	14.03 Volt	270 Pkt	81 Pcnt	62 Pcnt
1773141820	14.03 Volt	270 Pkt	81 Pcnt	62 Pcnt
1773141522	14.03 Volt	270 Pkt	82 Pcnt	62 Pcnt
1773141221	14.03 Volt	280 Pkt	84 Pcnt	62 Pcnt
1773141221	14.03 Volt	280 Pkt	84 Pcnt	62 Pcnt
1773140920	14.03 Volt	280 Pkt	84 Pcnt	62 Pcnt
1773140621	14.03 Volt	290 Pkt	83 Pcnt	62 Pcnt
1773140620	14.03 Volt	290 Pkt	83 Pcnt	62 Pcnt
1773140321	14.03 Volt	280 Pkt	83 Pcnt	62 Pcnt
1773140021	14.03 Volt	290 Pkt	83 Pcnt	62 Pcnt
1773140021	14.03 Volt	290 Pkt	83 Pcnt	62 Pcnt
1773139721	14.03 Volt	290 Pkt	83 Pcnt	62 Pcnt
1773139421	14.03 Volt	290 Pkt	83 Pcnt	62 Pcnt
1773139421	14.03 Volt	290 Pkt	83 Pcnt	62 Pcnt
1773139121	14.03 Volt	290 Pkt	82 Pcnt	62 Pcnt
1773138521	14.03 Volt	280 Pkt	80 Pcnt	62 Pcnt
1773138221	14.03 Volt	280 Pkt	79 Pcnt	62 Pcnt
1773138221	14.03 Volt	280 Pkt	79 Pcnt	62 Pcnt
1773137921	14.03 Volt	280 Pkt	81 Pcnt	62 Pcnt
1773137621	14.03 Volt	290 Pkt	81 Pcnt	62 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

DecEf: 0, 1, 0

Temp: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)