GOODMN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object GOODMN. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Digi1h*	Eff1h*
1776656092	12.8 Volt	140 Pkt	40 Pkt	70 Pcnt
1776655492	12.8 Volt	130 Pkt	40 Pkt	66 Pcnt
1776654892	12.8 Volt	120 Pkt	40 Pkt	63 Pcnt
1776654292	12.8 Volt	120 Pkt	40 Pkt	64 Pcnt
1776653692	12.8 Volt	120 Pkt	40 Pkt	65 Pcnt
1776653092	12.8 Volt	120 Pkt	40 Pkt	64 Pcnt
1776652492	12.8 Volt	120 Pkt	40 Pkt	64 Pcnt
1776651892	12.8 Volt	130 Pkt	40 Pkt	67 Pcnt
1776651292	12.8 Volt	140 Pkt	50 Pkt	68 Pcnt
1776650692	12.8 Volt	140 Pkt	50 Pkt	67 Pcnt
1776650092	12.8 Volt	160 Pkt	50 Pkt	68 Pcnt
1776649492	12.8 Volt	170 Pkt	50 Pkt	67 Pcnt
1776648892	12.8 Volt	170 Pkt	50 Pkt	67 Pcnt
1776648292	12.8 Volt	170 Pkt	50 Pkt	66 Pcnt
1776647692	12.8 Volt	170 Pkt	50 Pkt	66 Pcnt
1776647092	12.8 Volt	170 Pkt	50 Pkt	65 Pcnt
1776646492	12.8 Volt	160 Pkt	50 Pkt	64 Pcnt
1776645893	12.8 Volt	150 Pkt	50 Pkt	64 Pcnt
1776645293	12.8 Volt	140 Pkt	60 Pkt	62 Pcnt
1776644693	12.8 Volt	150 Pkt	60 Pkt	63 Pcnt
1776644093	12.8 Volt	150 Pkt	60 Pkt	63 Pcnt
1776643493	12.8 Volt	150 Pkt	60 Pkt	66 Pcnt
1776642893	12.8 Volt	150 Pkt	60 Pkt	68 Pcnt
1776642293	12.8 Volt	150 Pkt	50 Pkt	67 Pcnt
1776641693	12.8 Volt	150 Pkt	50 Pkt	67 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Digi1h: 0, 10, 0

Eff1h: 0, 1, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)