EL-F5ZQU Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-F5ZQU. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1780575983	0 RX Erlang	0.12 TX Erlang	0 RXcount/10m	9 TXcount/10m
1780575383	0 RX Erlang	0.64 TX Erlang	0 RXcount/10m	18 TXcount/10m
1780574783	0 RX Erlang	0.08 TX Erlang	0 RXcount/10m	3 TXcount/10m
1780574183	0 RX Erlang	0.18 TX Erlang	0 RXcount/10m	11 TXcount/10m
1780573583	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	2 TXcount/10m
1780572983	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1780572383	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1780571783	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	4 TXcount/10m
1780571183	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1780570583	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1780569983	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1780569383	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	4 TXcount/10m
1780568783	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	3 TXcount/10m
1780568183	0 RX Erlang	0.63 TX Erlang	0 RXcount/10m	17 TXcount/10m
1780567583	0 RX Erlang	0.38 TX Erlang	0 RXcount/10m	49 TXcount/10m
1780566983	0 RX Erlang	0.27 TX Erlang	0 RXcount/10m	12 TXcount/10m
1780566383	0 RX Erlang	0.23 TX Erlang	0 RXcount/10m	18 TXcount/10m
1780565783	0 RX Erlang	0.11 TX Erlang	0 RXcount/10m	7 TXcount/10m
1780565183	0 RX Erlang	0.24 TX Erlang	0 RXcount/10m	7 TXcount/10m
1780564583	0 RX Erlang	0.31 TX Erlang	0 RXcount/10m	10 TXcount/10m
1780563983	0 RX Erlang	0.53 TX Erlang	0 RXcount/10m	23 TXcount/10m
1780563383	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1780562783	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	6 TXcount/10m
1780562183	0 RX Erlang	0.36 TX Erlang	0 RXcount/10m	14 TXcount/10m
1780561583	0 RX Erlang	0.52 TX Erlang	0 RXcount/10m	15 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)