OK5TVR-17 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK5TVR-17. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkts*	DX_dist.*	live*	Temp_core*
1755760616	12 Pkts	41 km	50 min.	44.44 C
1755759715	9 Pkts	41 km	49 min.	43.89 C
1755759715	9 Pkts	41 km	49 min.	43.89 C
1755758814	58 Pkts	41 km	48 min.	43.89 C
1755758814	58 Pkts	41 km	48 min.	43.89 C
1755757913	16 Pkts	7 km	47 min.	43.89 C
1755757913	16 Pkts	7 km	47 min.	43.89 C
1755757012	11 Pkts	41 km	46 min.	43.89 C
1755757012	11 Pkts	41 km	46 min.	43.89 C
1755756111	16 Pkts	41 km	45 min.	43.89 C
1755756111	16 Pkts	41 km	45 min.	43.89 C
1755755210	32 Pkts	41 km	44 min.	44.44 C
1755754309	37 Pkts	16 km	43 min.	44.44 C
1755752507	11 Pkts	12 km	41 min.	43.89 C
1755752507	11 Pkts	12 km	41 min.	43.89 C
1755751606	8 Pkts	41 km	40 min.	44.44 C
1755751606	8 Pkts	41 km	40 min.	44.44 C
1755750705	9 Pkts	7 km	39 min.	45 C
1755750705	9 Pkts	7 km	39 min.	45 C
1755749804	13 Pkts	41 km	38 min.	43.89 C
1755749804	13 Pkts	41 km	38 min.	43.89 C
1755748903	13 Pkts	9 km	37 min.	43.89 C
1755748903	13 Pkts	9 km	37 min.	43.89 C
1755748002	9 Pkts	41 km	36 min.	43.89 C
1755748002	9 Pkts	41 km	36 min.	43.89 C

*Used Equation Coefficients:

RxPkts: 0, 1, 0

RF->Inet: 0, 1, 0

DX_dist.: 0, 1, 0

live: 0, 1, 0

Temp_core: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)