IT9FDP-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IT9FDP-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Solare*	Batteria*	Vcc*	Temp DC-DC*	Temp P.S.*
1757485334	15.16 Volt	13.41 Volt	12.85 Volt	35.3 C	30 C
1757485032	15.15 Volt	13.41 Volt	12.84 Volt	34.3 C	29.7 C
1757484741	15.08 Volt	13.35 Volt	12.8 Volt	33.2 C	29.4 C
1757484436	15.07 Volt	13.33 Volt	12.76 Volt	32.3 C	29.1 C
1757484146	14.76 Volt	13.18 Volt	12.56 Volt	31.9 C	29 C
1757483833	14.98 Volt	13.3 Volt	12.73 Volt	31.7 C	28.9 C
1757483532	14.9 Volt	13.28 Volt	12.6 Volt	31.1 C	28.7 C
1757483233	14.89 Volt	13.22 Volt	12.65 Volt	30.5 C	28.5 C
1757482940	14.74 Volt	13.18 Volt	12.5 Volt	30.1 C	28.5 C
1757482634	14.75 Volt	13.2 Volt	12.59 Volt	29.7 C	28.3 C
1757482332	14.68 Volt	13.12 Volt	12.47 Volt	29.3 C	28.2 C
1757482034	14.59 Volt	13.13 Volt	12.54 Volt	29.2 C	28.2 C
1757481733	14.57 Volt	13.13 Volt	12.46 Volt	29.1 C	28.1 C
1757481440	14.59 Volt	13.13 Volt	12.5 Volt	29 C	28.1 C
1757481135	14.53 Volt	13.11 Volt	12.52 Volt	28.8 C	28.1 C
1757480844	14.53 Volt	13.1 Volt	12.53 Volt	28.7 C	28.1 C
1757480534	14.47 Volt	13.07 Volt	12.42 Volt	28.6 C	28.1 C
1757479937	14.38 Volt	13.09 Volt	12.44 Volt	28.3 C	28.1 C
1757479646	14.16 Volt	13.08 Volt	12.5 Volt	28.1 C	28.1 C
1757479040	13.82 Volt	13.05 Volt	12.52 Volt	27.9 C	28.1 C
1757478732	9.47 Volt	13.07 Volt	12.49 Volt	27.8 C	28.1 C
1757478439	6.19 Volt	13.11 Volt	12.51 Volt	27.7 C	28.1 C
1757478134	4.87 Volt	13.09 Volt	12.49 Volt	27.7 C	28.1 C
1757477842	3.63 Volt	13.09 Volt	12.48 Volt	27.7 C	28.1 C
1757477533	2.93 Volt	13.06 Volt	12.4 Volt	27.7 C	28.1 C

*Used Equation Coefficients:

Solare: 0, 1, 0

Batteria: 0, 1, 0

Vcc: 0, 1, 0

Temp DC-DC: 0, 1, 0

Temp P.S.: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)