VA3XLT-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA3XLT-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Dg10m*	Rx1h*	Dg10m*	Eff1h*	Temp*
1784685588	4 Pkt	100 Pkt	4 Pkt	51 Pcnt	82.4 F
1784684747	1 Pkt	100 Pkt	1 Pkt	54 Pcnt	83.3 F
1784683906	2 Pkt	100 Pkt	2 Pkt	57 Pcnt	83.3 F
1784683065	5 Pkt	100 Pkt	5 Pkt	59 Pcnt	83.3 F
1784682225	2 Pkt	90 Pkt	2 Pkt	57 Pcnt	83.3 F
1784681391	1 Pkt	90 Pkt	1 Pkt	56 Pcnt	84.2 F
1784680543	1 Pkt	80 Pkt	1 Pkt	55 Pcnt	84.2 F
1784679702	0 Pkt	80 Pkt	0 Pkt	52 Pcnt	84.2 F
1784678861	1 Pkt	70 Pkt	1 Pkt	50 Pcnt	84.2 F
1784678020	3 Pkt	90 Pkt	3 Pkt	56 Pcnt	84.2 F
1784677180	0 Pkt	100 Pkt	0 Pkt	53 Pcnt	84.2 F
1784676339	1 Pkt	90 Pkt	1 Pkt	48 Pcnt	85.1 F
1784675498	2 Pkt	100 Pkt	2 Pkt	49 Pcnt	85.1 F
1784674657	18 Pkt	110 Pkt	18 Pkt	44 Pcnt	85.1 F
1784673816	0 Pkt	90 Pkt	0 Pkt	41 Pcnt	84.2 F
1784672976	3 Pkt	90 Pkt	3 Pkt	39 Pcnt	84.2 F
1784672135	2 Pkt	110 Pkt	2 Pkt	42 Pcnt	84.2 F
1784671294	3 Pkt	130 Pkt	3 Pkt	42 Pcnt	84.2 F
1784670454	1 Pkt	130 Pkt	1 Pkt	41 Pcnt	85.1 F
1784669612	3 Pkt	170 Pkt	3 Pkt	45 Pcnt	85.1 F
1784668772	15 Pkt	190 Pkt	15 Pkt	45 Pcnt	86 F
1784667931	3 Pkt	190 Pkt	3 Pkt	46 Pcnt	86 F
1784667090	1 Pkt	200 Pkt	1 Pkt	47 Pcnt	86.9 F
1784666249	2 Pkt	180 Pkt	2 Pkt	46 Pcnt	87.8 F
1784665408	3 Pkt	150 Pkt	3 Pkt	44 Pcnt	88.7 F

*Used Equation Coefficients:

Dg10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 0.9, -83.2

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)