Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object IU4DKT-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time Rx10m* Rx1h* Dg10m* DgR* Eff1h*
1765598483 72 Pkt 490 Pkt 0 Pkt 0.2 Pcnt 70 Pcnt
1765598183 66 Pkt 480 Pkt 0 Pkt 0.2 Pcnt 69 Pcnt
1765597883 73 Pkt 470 Pkt 0 Pkt 0.2 Pcnt 67 Pcnt
1765597583 83 Pkt 470 Pkt 0 Pkt 0.2 Pcnt 66 Pcnt
1765597283 85 Pkt 470 Pkt 0 Pkt 0.2 Pcnt 66 Pcnt
1765596983 82 Pkt 450 Pkt 0 Pkt 0.2 Pcnt 65 Pcnt
1765596683 79 Pkt 450 Pkt 0 Pkt 0.2 Pcnt 66 Pcnt
1765596383 63 Pkt 440 Pkt 0 Pkt 0.2 Pcnt 65 Pcnt
1765596083 65 Pkt 440 Pkt 0 Pkt 0.2 Pcnt 64 Pcnt
1765595783 73 Pkt 450 Pkt 0 Pkt 0.2 Pcnt 65 Pcnt
1765595483 73 Pkt 460 Pkt 0 Pkt 0.2 Pcnt 65 Pcnt
1765595183 71 Pkt 450 Pkt 0 Pkt 0.2 Pcnt 65 Pcnt
1765594883 58 Pkt 450 Pkt 0 Pkt 0.2 Pcnt 65 Pcnt
1765594583 58 Pkt 450 Pkt 0 Pkt 0.2 Pcnt 64 Pcnt
1765594283 75 Pkt 450 Pkt 0 Pkt 0.2 Pcnt 64 Pcnt
1765593983 68 Pkt 450 Pkt 0 Pkt 0.2 Pcnt 64 Pcnt
1765593683 64 Pkt 440 Pkt 0 Pkt 0.2 Pcnt 64 Pcnt
1765593383 69 Pkt 440 Pkt 0 Pkt 0.2 Pcnt 64 Pcnt
1765593083 72 Pkt 440 Pkt 0 Pkt 0.2 Pcnt 62 Pcnt
1765592783 73 Pkt 440 Pkt 0 Pkt 0.2 Pcnt 63 Pcnt
1765592483 77 Pkt 430 Pkt 0 Pkt 0.2 Pcnt 61 Pcnt
1765592183 73 Pkt 420 Pkt 0 Pkt 0.2 Pcnt 61 Pcnt
1765591883 68 Pkt 430 Pkt 0 Pkt 0.2 Pcnt 60 Pcnt
1765591583 67 Pkt 430 Pkt 0 Pkt 0.2 Pcnt 61 Pcnt
1765591283 61 Pkt 420 Pkt 0 Pkt 0.2 Pcnt 60 Pcnt
*Used Equation Coefficients:
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
DgR: 0, 0.001, 0
Eff1h: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)