W0UPS-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W0UPS-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1757444766	0.11 Rx Erlang	0.04 Tx Erlang	126 count/10m	0 count/10m	43 count/10m
1757443566	0.12 Rx Erlang	0.05 Tx Erlang	144 count/10m	1 count/10m	58 count/10m
1757442367	0.11 Rx Erlang	0.05 Tx Erlang	133 count/10m	0 count/10m	57 count/10m
1757441166	0.11 Rx Erlang	0.04 Tx Erlang	120 count/10m	8 count/10m	40 count/10m
1757439967	0.13 Rx Erlang	0.04 Tx Erlang	142 count/10m	18 count/10m	45 count/10m
1757438767	0.14 Rx Erlang	0.05 Tx Erlang	143 count/10m	0 count/10m	49 count/10m
1757437567	0.13 Rx Erlang	0.05 Tx Erlang	145 count/10m	0 count/10m	49 count/10m
1757436366	0.12 Rx Erlang	0.04 Tx Erlang	134 count/10m	0 count/10m	43 count/10m
1757435166	0.13 Rx Erlang	0.04 Tx Erlang	143 count/10m	0 count/10m	42 count/10m
1757433967	0.14 Rx Erlang	0.04 Tx Erlang	152 count/10m	0 count/10m	42 count/10m
1757432767	0.15 Rx Erlang	0.05 Tx Erlang	157 count/10m	0 count/10m	51 count/10m
1757431567	0.14 Rx Erlang	0.04 Tx Erlang	153 count/10m	0 count/10m	43 count/10m
1757430367	0.15 Rx Erlang	0.05 Tx Erlang	164 count/10m	1 count/10m	48 count/10m
1757429167	0.12 Rx Erlang	0.03 Tx Erlang	140 count/10m	1 count/10m	36 count/10m
1757427967	0.14 Rx Erlang	0.04 Tx Erlang	168 count/10m	1 count/10m	42 count/10m
1757426767	0.16 Rx Erlang	0.04 Tx Erlang	195 count/10m	2 count/10m	43 count/10m
1757425567	0.15 Rx Erlang	0.04 Tx Erlang	170 count/10m	0 count/10m	39 count/10m
1757424367	0.13 Rx Erlang	0.04 Tx Erlang	136 count/10m	0 count/10m	39 count/10m
1757423167	0.14 Rx Erlang	0.05 Tx Erlang	152 count/10m	0 count/10m	48 count/10m
1757421978	0.16 Rx Erlang	0.05 Tx Erlang	161 count/10m	0 count/10m	47 count/10m
1757420766	0.12 Rx Erlang	0.04 Tx Erlang	134 count/10m	0 count/10m	39 count/10m
1757419567	0.11 Rx Erlang	0.03 Tx Erlang	119 count/10m	0 count/10m	35 count/10m
1757418366	0.11 Rx Erlang	0.04 Tx Erlang	111 count/10m	1 count/10m	34 count/10m
1757417167	0.11 Rx Erlang	0.03 Tx Erlang	108 count/10m	0 count/10m	33 count/10m
1757415967	0.11 Rx Erlang	0.03 Tx Erlang	121 count/10m	0 count/10m	31 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)