N2NWK Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N2NWK. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784685714	13.28 Volt	530 Pkt	0 Pkt	88 Pcnt
1784685708	13.28 Volt	530 Pkt	0 Pkt	88 Pcnt
1784685408	13.43 Volt	530 Pkt	0 Pkt	87 Pcnt
1784685110	13.43 Volt	500 Pkt	0 Pkt	86 Pcnt
1784685108	13.43 Volt	500 Pkt	0 Pkt	86 Pcnt
1784684808	13.28 Volt	500 Pkt	0 Pkt	86 Pcnt
1784684510	13.43 Volt	480 Pkt	0 Pkt	86 Pcnt
1784684508	13.43 Volt	480 Pkt	0 Pkt	86 Pcnt
1784684208	13.43 Volt	470 Pkt	0 Pkt	86 Pcnt
1784683909	13.43 Volt	470 Pkt	0 Pkt	86 Pcnt
1784683608	13.43 Volt	480 Pkt	0 Pkt	86 Pcnt
1784683310	13.43 Volt	480 Pkt	0 Pkt	87 Pcnt
1784683308	13.43 Volt	480 Pkt	0 Pkt	87 Pcnt
1784683008	13.43 Volt	480 Pkt	10 Pkt	86 Pcnt
1784682708	13.43 Volt	490 Pkt	10 Pkt	85 Pcnt
1784682409	13.43 Volt	490 Pkt	10 Pkt	84 Pcnt
1784682109	13.43 Volt	500 Pkt	10 Pkt	84 Pcnt
1784681809	13.43 Volt	540 Pkt	10 Pkt	83 Pcnt
1784681513	13.43 Volt	560 Pkt	10 Pkt	82 Pcnt
1784681509	13.43 Volt	560 Pkt	10 Pkt	82 Pcnt
1784681209	13.43 Volt	580 Pkt	10 Pkt	81 Pcnt
1784680910	13.43 Volt	600 Pkt	20 Pkt	80 Pcnt
1784680909	13.43 Volt	600 Pkt	20 Pkt	80 Pcnt
1784680608	13.43 Volt	610 Pkt	10 Pkt	79 Pcnt
1784680313	13.43 Volt	600 Pkt	20 Pkt	78 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)