YH0DVA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YH0DVA-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1765736212	30 Pkt	0 Pkt	31 dBm	14.79 V
1765735887	36 Pkt	1 Pkt	31 dBm	14.79 V
1765735562	24 Pkt	0 Pkt	31 dBm	14.79 V
1765735253	31 Pkt	0 Pkt	31 dBm	14.79 V
1765734913	25 Pkt	1 Pkt	31 dBm	14.77 V
1765734589	31 Pkt	0 Pkt	31 dBm	14.77 V
1765734264	35 Pkt	1 Pkt	31 dBm	14.77 V
1765733937	32 Pkt	0 Pkt	31 dBm	14.72 V
1765733614	21 Pkt	0 Pkt	31 dBm	14.7 V
1765733287	33 Pkt	0 Pkt	31 dBm	14.27 V
1765732963	17 Pkt	0 Pkt	31 dBm	14.7 V
1765732639	29 Pkt	1 Pkt	31 dBm	14.77 V
1765732313	33 Pkt	0 Pkt	31 dBm	14.72 V
1765731987	21 Pkt	0 Pkt	31 dBm	14.72 V
1765731663	40 Pkt	0 Pkt	31 dBm	14.77 V
1765731337	46 Pkt	0 Pkt	31 dBm	14.79 V
1765731008	37 Pkt	0 Pkt	31 dBm	14.79 V
1765730683	26 Pkt	0 Pkt	31 dBm	14.79 V
1765730359	31 Pkt	0 Pkt	31 dBm	14.81 V
1765730034	21 Pkt	0 Pkt	31 dBm	14.77 V
1765729384	31 Pkt	0 Pkt	31 dBm	14.79 V
1765729057	28 Pkt	0 Pkt	31 dBm	14.79 V
1765728733	31 Pkt	0 Pkt	31 dBm	14.79 V
1765728409	22 Pkt	0 Pkt	31 dBm	14.79 V
1765728084	30 Pkt	0 Pkt	31 dBm	14.81 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)