EL-IK1ZVK Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-IK1ZVK. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1780529839	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1780529239	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1780528639	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1780528039	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	18 TXcount/10m
1780527439	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	6 TXcount/10m
1780526839	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	4 TXcount/10m
1780526239	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1780525639	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	8 TXcount/10m
1780525039	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1780524439	0 RX Erlang	0.08 TX Erlang	0 RXcount/10m	16 TXcount/10m
1780523839	0 RX Erlang	0.04 TX Erlang	0 RXcount/10m	16 TXcount/10m
1780523239	0 RX Erlang	0.09 TX Erlang	0 RXcount/10m	17 TXcount/10m
1780522639	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1780522039	0 RX Erlang	0.62 TX Erlang	0 RXcount/10m	8 TXcount/10m
1780521439	0 RX Erlang	0.38 TX Erlang	0 RXcount/10m	17 TXcount/10m
1780520839	0 RX Erlang	0.82 TX Erlang	0 RXcount/10m	24 TXcount/10m
1780520239	0 RX Erlang	0.87 TX Erlang	0 RXcount/10m	10 TXcount/10m
1780519639	0 RX Erlang	0.91 TX Erlang	0 RXcount/10m	11 TXcount/10m
1780519039	0 RX Erlang	0.92 TX Erlang	0 RXcount/10m	13 TXcount/10m
1780518439	0 RX Erlang	0.91 TX Erlang	0 RXcount/10m	17 TXcount/10m
1780517839	0 RX Erlang	0.92 TX Erlang	0 RXcount/10m	18 TXcount/10m
1780517239	0 RX Erlang	0.86 TX Erlang	0 RXcount/10m	22 TXcount/10m
1780516639	0 RX Erlang	0.76 TX Erlang	0 RXcount/10m	20 TXcount/10m
1780516039	0 RX Erlang	0.77 TX Erlang	0 RXcount/10m	22 TXcount/10m
1780515439	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)