DB0OE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0OE. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Eff*
1777087933	13.95 Volt	690 Pkt	61 Pcnt	58 Pcnt
1777087633	13.95 Volt	680 Pkt	61 Pcnt	58 Pcnt
1777087333	13.95 Volt	660 Pkt	60 Pcnt	58 Pcnt
1777087033	13.95 Volt	660 Pkt	61 Pcnt	58 Pcnt
1777086733	13.95 Volt	630 Pkt	58 Pcnt	58 Pcnt
1777086433	13.95 Volt	630 Pkt	57 Pcnt	58 Pcnt
1777086133	13.95 Volt	610 Pkt	57 Pcnt	58 Pcnt
1777085833	13.95 Volt	600 Pkt	57 Pcnt	58 Pcnt
1777085533	13.95 Volt	570 Pkt	55 Pcnt	58 Pcnt
1777085233	13.95 Volt	590 Pkt	56 Pcnt	58 Pcnt
1777084933	13.95 Volt	610 Pkt	58 Pcnt	58 Pcnt
1777084633	13.95 Volt	580 Pkt	59 Pcnt	58 Pcnt
1777084333	13.95 Volt	550 Pkt	58 Pcnt	58 Pcnt
1777084033	13.95 Volt	530 Pkt	58 Pcnt	58 Pcnt
1777083733	13.95 Volt	540 Pkt	58 Pcnt	58 Pcnt
1777083433	13.95 Volt	540 Pkt	59 Pcnt	58 Pcnt
1777083133	13.95 Volt	550 Pkt	61 Pcnt	58 Pcnt
1777082833	13.95 Volt	570 Pkt	63 Pcnt	58 Pcnt
1777082533	13.95 Volt	560 Pkt	63 Pcnt	58 Pcnt
1777082233	13.95 Volt	540 Pkt	63 Pcnt	58 Pcnt
1777081933	13.95 Volt	550 Pkt	62 Pcnt	58 Pcnt
1777081633	13.95 Volt	530 Pkt	61 Pcnt	58 Pcnt
1777081333	13.95 Volt	500 Pkt	59 Pcnt	58 Pcnt
1777081033	13.95 Volt	520 Pkt	59 Pcnt	58 Pcnt
1777080733	13.95 Volt	560 Pkt	60 Pcnt	58 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)