F5UGQ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F5UGQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	V_Bat*	V_Ext*
1772640373	146 Count	482 Count	4.29 VDC	0.14 VDC
1772638570	145 Count	478 Count	4.24 VDC	0.14 VDC
1772634965	143 Count	471 Count	4.28 VDC	0.14 VDC
1772633162	142 Count	468 Count	4.28 VDC	0.14 VDC
1772631359	141 Count	464 Count	4.25 VDC	0.14 VDC
1772629556	140 Count	457 Count	4.25 VDC	0.14 VDC
1772627786	139 Count	453 Count	4.2 VDC	0.14 VDC
1772625996	138 Count	450 Count	4.3 VDC	0.14 VDC
1772624180	137 Count	431 Count	4.28 VDC	0.14 VDC
1772620574	135 Count	422 Count	4.19 VDC	0.14 VDC
1772618772	134 Count	402 Count	4.28 VDC	0.14 VDC
1772616969	133 Count	397 Count	4.3 VDC	0.14 VDC
1772615166	132 Count	392 Count	4.2 VDC	0.14 VDC
1772611561	130 Count	381 Count	4.27 VDC	0.14 VDC
1772609758	129 Count	378 Count	4.27 VDC	0.14 VDC
1772607955	128 Count	373 Count	4.26 VDC	0.14 VDC
1772606185	127 Count	370 Count	4.24 VDC	0.14 VDC
1772604382	126 Count	366 Count	4.19 VDC	0.14 VDC
1772602579	125 Count	361 Count	4.25 VDC	0.14 VDC
1772600777	124 Count	358 Count	4.28 VDC	0.14 VDC
1772598974	123 Count	356 Count	4.2 VDC	0.14 VDC
1772597195	122 Count	353 Count	4.22 VDC	0.14 VDC
1772595368	121 Count	350 Count	4.22 VDC	0.14 VDC
1772593565	120 Count	345 Count	4.19 VDC	0.14 VDC
1772591763	119 Count	339 Count	4.25 VDC	0.14 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)