VA3XLT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA3XLT-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Rx10m*
1784675884	12.6 Volt	110 Pkt	95 Pcnt	9 Pkt
1784675524	12.6 Volt	110 Pkt	97 Pcnt	7 Pkt
1784675164	12.6 Volt	120 Pkt	96 Pcnt	15 Pkt
1784674804	12.6 Volt	120 Pkt	96 Pcnt	41 Pkt
1784674444	12.6 Volt	110 Pkt	98 Pcnt	19 Pkt
1784674084	12.6 Volt	100 Pkt	98 Pcnt	8 Pkt
1784673724	12.6 Volt	110 Pkt	97 Pcnt	7 Pkt
1784673364	12.6 Volt	120 Pkt	96 Pcnt	23 Pkt
1784673004	12.6 Volt	120 Pkt	96 Pcnt	15 Pkt
1784672644	12.6 Volt	140 Pkt	91 Pcnt	9 Pkt
1784672284	12.6 Volt	140 Pkt	89 Pcnt	21 Pkt
1784671924	12.6 Volt	150 Pkt	84 Pcnt	25 Pkt
1784671564	12.6 Volt	160 Pkt	77 Pcnt	21 Pkt
1784671204	12.6 Volt	160 Pkt	76 Pcnt	14 Pkt
1784670844	12.6 Volt	160 Pkt	71 Pcnt	10 Pkt
1784670484	12.6 Volt	160 Pkt	67 Pcnt	15 Pkt
1784670124	12.6 Volt	170 Pkt	66 Pcnt	29 Pkt
1784669764	12.6 Volt	170 Pkt	63 Pcnt	31 Pkt
1784669405	12.6 Volt	170 Pkt	61 Pcnt	32 Pkt
1784669044	12.6 Volt	150 Pkt	56 Pcnt	15 Pkt
1784668684	12.6 Volt	150 Pkt	54 Pcnt	36 Pkt
1784668325	12.6 Volt	150 Pkt	52 Pcnt	45 Pkt
1784667965	12.6 Volt	130 Pkt	48 Pcnt	25 Pkt
1784667605	12.6 Volt	120 Pkt	46 Pcnt	20 Pkt
1784667245	12.6 Volt	110 Pkt	45 Pcnt	14 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Rx10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)