N7UV-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N7UV-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Isolar*	Tbat*	Tcab*	RX1h*
1777278134	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	220 Pkt
1777277534	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	220 Pkt
1777276935	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	220 Pkt
1777276335	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	210 Pkt
1777275735	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	240 Pkt
1777275135	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	240 Pkt
1777274535	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	250 Pkt
1777273935	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	250 Pkt
1777273335	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	260 Pkt
1777272735	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	270 Pkt
1777272135	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	240 Pkt
1777271535	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	230 Pkt
1777270935	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	220 Pkt
1777270335	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	230 Pkt
1777269735	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	220 Pkt
1777269135	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	220 Pkt
1777268535	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	220 Pkt
1777268433	33 Volt	94.33 Amp	-64.43 C	-64.43 C	0 Pkt
1777267935	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	220 Pkt
1777267335	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	220 Pkt
1777266735	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	220 Pkt
1777266135	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	220 Pkt
1777265535	13.28 Volt	-25 Amp	-0.01 C	-64.43 C	220 Pkt
1777264935	13.35 Volt	-25 Amp	-0.01 C	-64.43 C	220 Pkt
1777264335	13.35 Volt	-25 Amp	-0.01 C	-64.43 C	230 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Isolar: 0, 0.1953, -24.9984

Tbat: 0, 0.5033, -64.43

Tcab: 0, 0.5033, -64.43

RX1h: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)