OE9GHV-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE9GHV-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	temp*
1765569791	14.25 Volt	200 Pkt	40 Pkt	56 Pcnt	11.5 °C
1765569191	14.25 Volt	200 Pkt	30 Pkt	56 Pcnt	11.5 °C
1765568591	14.25 Volt	220 Pkt	30 Pkt	57 Pcnt	11.5 °C
1765567991	14.18 Volt	220 Pkt	30 Pkt	57 Pcnt	11.5 °C
1765567391	14.1 Volt	230 Pkt	20 Pkt	56 Pcnt	11.5 °C
1765566791	14.25 Volt	250 Pkt	20 Pkt	54 Pcnt	12 °C
1765566191	14.25 Volt	260 Pkt	20 Pkt	53 Pcnt	11.5 °C
1765565591	14.25 Volt	270 Pkt	30 Pkt	55 Pcnt	12 °C
1765564991	14.25 Volt	260 Pkt	30 Pkt	51 Pcnt	12 °C
1765564391	14.25 Volt	260 Pkt	30 Pkt	49 Pcnt	12 °C
1765563791	14.1 Volt	270 Pkt	30 Pkt	49 Pcnt	12 °C
1765563191	14.25 Volt	280 Pkt	40 Pkt	49 Pcnt	12 °C
1765562591	14.25 Volt	280 Pkt	40 Pkt	49 Pcnt	12 °C
1765561991	14.25 Volt	270 Pkt	50 Pkt	49 Pcnt	12 °C
1765560791	14.25 Volt	260 Pkt	50 Pkt	51 Pcnt	12 °C
1765560191	14.1 Volt	230 Pkt	40 Pkt	52 Pcnt	12 °C
1765559603	14.25 Volt	210 Pkt	30 Pkt	54 Pcnt	12 °C
1765558991	14.25 Volt	210 Pkt	30 Pkt	57 Pcnt	12 °C
1765558391	14.25 Volt	190 Pkt	40 Pkt	57 Pcnt	12 °C
1765557791	14.25 Volt	180 Pkt	40 Pkt	60 Pcnt	12 °C
1765557191	14.25 Volt	180 Pkt	30 Pkt	58 Pcnt	12 °C
1765556591	14.1 Volt	170 Pkt	30 Pkt	58 Pcnt	12 °C
1765555991	14.25 Volt	180 Pkt	30 Pkt	59 Pcnt	12 °C
1765555391	14.25 Volt	180 Pkt	20 Pkt	55 Pcnt	12 °C
1765554801	14.25 Volt	190 Pkt	20 Pkt	56 Pcnt	12 °C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)