SM4XFJ-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SM4XFJ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1788576136	12.6 Volt	90 Pkt	30 Pkt	82 Pcnt
1788575827	12.6 Volt	90 Pkt	20 Pkt	82 Pcnt
1788575527	12.6 Volt	80 Pkt	20 Pkt	81 Pcnt
1788575227	12.6 Volt	90 Pkt	20 Pkt	81 Pcnt
1788574927	12.6 Volt	80 Pkt	20 Pkt	81 Pcnt
1788574627	12.6 Volt	80 Pkt	20 Pkt	81 Pcnt
1788574327	12.6 Volt	80 Pkt	20 Pkt	83 Pcnt
1788574027	12.6 Volt	80 Pkt	20 Pkt	85 Pcnt
1788573727	12.6 Volt	90 Pkt	20 Pkt	85 Pcnt
1788573427	12.6 Volt	80 Pkt	20 Pkt	85 Pcnt
1788573127	12.6 Volt	80 Pkt	20 Pkt	85 Pcnt
1788572827	12.6 Volt	80 Pkt	20 Pkt	85 Pcnt
1788572527	12.6 Volt	80 Pkt	20 Pkt	88 Pcnt
1788572227	12.6 Volt	90 Pkt	20 Pkt	87 Pcnt
1788571927	12.6 Volt	90 Pkt	20 Pkt	85 Pcnt
1788571627	12.6 Volt	90 Pkt	20 Pkt	88 Pcnt
1788571327	12.6 Volt	90 Pkt	20 Pkt	88 Pcnt
1788571027	12.6 Volt	90 Pkt	20 Pkt	88 Pcnt
1788570727	12.6 Volt	80 Pkt	20 Pkt	88 Pcnt
1788570427	12.6 Volt	90 Pkt	20 Pkt	87 Pcnt
1788570127	12.6 Volt	80 Pkt	20 Pkt	86 Pcnt
1788569827	12.6 Volt	80 Pkt	20 Pkt	88 Pcnt
1788569527	12.6 Volt	80 Pkt	20 Pkt	89 Pcnt
1788569227	12.6 Volt	80 Pkt	20 Pkt	88 Pcnt
1788568927	12.6 Volt	80 Pkt	20 Pkt	88 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)