W3NEP-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W3NEP-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	CbTmp*
1784674640	12.98 Volt	170 Pkt	80 Pkt	91 Pcnt	77 F
1784672779	12.98 Volt	170 Pkt	90 Pkt	89 Pcnt	77 F
1784670919	12.98 Volt	160 Pkt	90 Pkt	78 Pcnt	77 F
1784669060	12.98 Volt	160 Pkt	90 Pkt	80 Pcnt	77 F
1784667200	12.98 Volt	170 Pkt	90 Pkt	85 Pcnt	77 F
1784665340	12.98 Volt	150 Pkt	80 Pkt	71 Pcnt	77 F
1784663480	12.98 Volt	140 Pkt	80 Pkt	63 Pcnt	77 F
1784661620	12.98 Volt	110 Pkt	60 Pkt	50 Pcnt	76.1 F
1784659760	12.98 Volt	110 Pkt	70 Pkt	59 Pcnt	76.1 F
1784657900	12.98 Volt	140 Pkt	80 Pkt	76 Pcnt	76.1 F
1784656040	12.98 Volt	130 Pkt	70 Pkt	62 Pcnt	76.1 F
1784654180	12.98 Volt	130 Pkt	80 Pkt	61 Pcnt	75.2 F
1784652320	12.98 Volt	140 Pkt	90 Pkt	81 Pcnt	75.2 F
1784650460	12.98 Volt	150 Pkt	90 Pkt	86 Pcnt	75.2 F
1784648601	12.98 Volt	150 Pkt	90 Pkt	82 Pcnt	75.2 F
1784646741	12.98 Volt	130 Pkt	80 Pkt	74 Pcnt	74.3 F
1784644881	12.98 Volt	120 Pkt	70 Pkt	61 Pcnt	74.3 F
1784643021	12.98 Volt	90 Pkt	50 Pkt	44 Pcnt	73.4 F
1784641161	12.98 Volt	40 Pkt	30 Pkt	25 Pcnt	73.4 F
1784639301	12.75 Volt	90 Pkt	60 Pkt	51 Pcnt	73.4 F
1784598145	12.98 Volt	0 Pkt	0 Pkt	100 Pcnt	71.6 F
1784597491	12.9 Volt	0 Pkt	0 Pkt	0 Pcnt	71.6 F
1784588459	13.05 Volt	10 Pkt	0 Pkt	8 Pcnt	77 F
1784586599	13.05 Volt	10 Pkt	0 Pkt	6 Pcnt	77.9 F
1784584739	13.05 Volt	10 Pkt	10 Pkt	6 Pcnt	77 F

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

CbTmp: 0, 0.9, -83.2

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)