K4ROM-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K4ROM-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	BattV*	BattC*	SolarV*	SolarC*	chgWhToday*
1784779248	51.64 V	0 A	0.02 V	0 A	0 Wh
1784777447	51.63 V	0 A	0.02 V	0 A	850 Wh
1784775647	51.62 V	0 A	0.03 V	0 A	850 Wh
1784773848	51.65 V	0 A	0.01 V	0 A	850 Wh
1784772047	51.68 V	0 A	0.01 V	0 A	850 Wh
1784770247	51.76 V	0 A	0.03 V	0 A	850 Wh
1784768447	52 V	0 A	1.44 V	0 A	850 Wh
1784766647	52.56 V	0 A	52.47 V	0 A	850 Wh
1784764846	53.45 V	0.54 A	56.75 V	0.5 A	850 Wh
1784763057	53.46 V	0.78 A	56.87 V	0.73 A	830 Wh
1784761247	53.26 V	0.49 A	56.59 V	0.46 A	810 Wh
1784759446	53.8 V	0.73 A	79.89 V	0.49 A	790 Wh
1784757646	53.89 V	0.59 A	91.88 V	0.34 A	770 Wh
1784755846	53.93 V	0.92 A	94.88 V	0.52 A	740 Wh
1784754046	53.9 V	0.79 A	96.06 V	0.44 A	720 Wh
1784752245	53.86 V	0.9 A	89.78 V	0.53 A	700 Wh
1784750445	53.92 V	0.89 A	96.55 V	0.49 A	670 Wh
1784748650	53.92 V	0.81 A	94.05 V	0.46 A	650 Wh
1784746845	53.97 V	0.25 A	96.02 V	0.14 A	630 Wh
1784745045	54.58 V	1.45 A	96.38 V	0.82 A	600 Wh
1784743244	53.98 V	0.87 A	95.95 V	0.48 A	520 Wh
1784741445	54 V	1 A	95.94 V	0.56 A	490 Wh
1784739644	53.96 V	0.98 A	97.12 V	0.54 A	470 Wh
1784737844	54.01 V	1.13 A	96.17 V	0.63 A	440 Wh
1784736044	53.92 V	0.83 A	96.53 V	0.46 A	420 Wh

*Used Equation Coefficients:

BattV: 0, 1, 0

BattC: 0, 1, 0

SolarV: 0, 1, 0

SolarC: 0, 1, 0

chgWhToday: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)