9W4GAW-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W4GAW-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1765672534	19 Pkt	12 Pkt	7 Pkt	-56 dBm	7.88 V
1765670705	28 Pkt	14 Pkt	8 Pkt	-60 dBm	7.59 V
1765668875	31 Pkt	6 Pkt	7 Pkt	-58 dBm	7.32 V
1765667046	28 Pkt	6 Pkt	10 Pkt	-61 dBm	7.55 V
1765665216	28 Pkt	0 Pkt	10 Pkt	-57 dBm	7.32 V
1765663387	2 Pkt	0 Pkt	0 Pkt	-58 dBm	4.06 V
1765271489	23 Pkt	2 Pkt	5 Pkt	-69 dBm	0.55 V
1765269661	66 Pkt	0 Pkt	8 Pkt	-67 dBm	0.35 V
1765267828	54 Pkt	4 Pkt	8 Pkt	-68 dBm	0.35 V
1765265997	40 Pkt	0 Pkt	8 Pkt	-68 dBm	0.8 V
1765264167	34 Pkt	0 Pkt	3 Pkt	-66 dBm	1.54 V
1765262337	0 Pkt	0 Pkt	0 Pkt	-68 dBm	0.64 V
1765260444	22 Pkt	1 Pkt	5 Pkt	-70 dBm	0.94 V
1765258617	31 Pkt	1 Pkt	9 Pkt	-68 dBm	1.58 V
1765256788	22 Pkt	14 Pkt	7 Pkt	-67 dBm	3.55 V
1765254960	44 Pkt	8 Pkt	6 Pkt	-69 dBm	4.45 V
1765253142	34 Pkt	7 Pkt	7 Pkt	-70 dBm	3.61 V
1765251296	21 Pkt	0 Pkt	6 Pkt	-69 dBm	4.55 V
1765249469	19 Pkt	0 Pkt	7 Pkt	-70 dBm	3.38 V
1765247641	4 Pkt	0 Pkt	0 Pkt	-70 dBm	1.74 V
1765245750	29 Pkt	0 Pkt	5 Pkt	-69 dBm	1.58 V
1765243920	23 Pkt	5 Pkt	7 Pkt	-68 dBm	1.17 V
1765242091	68 Pkt	12 Pkt	8 Pkt	-69 dBm	0.64 V
1765240258	64 Pkt	0 Pkt	6 Pkt	-69 dBm	0.59 V
1765238424	27 Pkt	0 Pkt	6 Pkt	-70 dBm	6.97 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)