BO2AB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BO2AB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	ALL_PKTS_10M*	FWD_APRS_10M*	POS_PKTS_10M*	MSG_PKTS_10M*	CTRL_PKTS_10M*
1776877014	123 cnt	2 cnt	103 cnt	3 cnt	17 cnt
1776876414	81 cnt	2 cnt	67 cnt	2 cnt	12 cnt
1776875814	0 cnt	0 cnt	0 cnt	0 cnt	0 cnt
1776874649	0 cnt	0 cnt	0 cnt	0 cnt	0 cnt
1776873265	124 cnt	3 cnt	103 cnt	1 cnt	20 cnt
1776872665	112 cnt	1 cnt	98 cnt	0 cnt	14 cnt
1776872065	104 cnt	0 cnt	85 cnt	1 cnt	18 cnt
1776871465	131 cnt	5 cnt	109 cnt	2 cnt	20 cnt
1776870865	101 cnt	4 cnt	87 cnt	0 cnt	14 cnt
1776870265	128 cnt	5 cnt	109 cnt	0 cnt	19 cnt
1776869665	108 cnt	3 cnt	89 cnt	1 cnt	18 cnt
1776869065	109 cnt	1 cnt	88 cnt	2 cnt	19 cnt
1776868465	112 cnt	4 cnt	95 cnt	0 cnt	17 cnt
1776867865	113 cnt	1 cnt	100 cnt	0 cnt	13 cnt
1776867265	0 cnt	0 cnt	0 cnt	0 cnt	0 cnt
1776866840	108 cnt	4 cnt	86 cnt	2 cnt	20 cnt
1776866240	113 cnt	12 cnt	90 cnt	6 cnt	17 cnt
1776865640	101 cnt	2 cnt	84 cnt	0 cnt	17 cnt
1776865040	116 cnt	1 cnt	96 cnt	0 cnt	19 cnt
1776864440	120 cnt	4 cnt	94 cnt	4 cnt	22 cnt
1776863840	121 cnt	0 cnt	96 cnt	0 cnt	24 cnt
1776863240	125 cnt	1 cnt	100 cnt	1 cnt	24 cnt
1776862640	121 cnt	0 cnt	100 cnt	0 cnt	21 cnt
1776862040	121 cnt	0 cnt	101 cnt	3 cnt	17 cnt
1776861440	117 cnt	2 cnt	98 cnt	0 cnt	19 cnt

*Used Equation Coefficients:

ALL_PKTS_10M: 0, 1, 0

FWD_APRS_10M: 0, 1, 0

POS_PKTS_10M: 0, 1, 0

MSG_PKTS_10M: 0, 1, 0

CTRL_PKTS_10M: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)