IR2DD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2DD. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff*
1765590604	68 Pkt	440 Pkt	0.21 Pcnt	75 Pcnt
1765590304	79 Pkt	440 Pkt	0.21 Pcnt	75 Pcnt
1765590004	80 Pkt	440 Pkt	0.21 Pcnt	75 Pcnt
1765589704	69 Pkt	430 Pkt	0.21 Pcnt	75 Pcnt
1765589404	56 Pkt	430 Pkt	0.21 Pcnt	75 Pcnt
1765589104	61 Pkt	430 Pkt	0.21 Pcnt	75 Pcnt
1765588804	73 Pkt	440 Pkt	0.21 Pcnt	75 Pcnt
1765588504	72 Pkt	430 Pkt	0.21 Pcnt	75 Pcnt
1765588204	75 Pkt	430 Pkt	0.21 Pcnt	75 Pcnt
1765587904	62 Pkt	430 Pkt	0.21 Pcnt	75 Pcnt
1765587304	67 Pkt	440 Pkt	0.21 Pcnt	75 Pcnt
1765587004	62 Pkt	440 Pkt	0.21 Pcnt	75 Pcnt
1765586704	62 Pkt	430 Pkt	0.21 Pcnt	75 Pcnt
1765586404	78 Pkt	440 Pkt	0.21 Pcnt	75 Pcnt
1765586104	70 Pkt	440 Pkt	0.21 Pcnt	75 Pcnt
1765585804	58 Pkt	440 Pkt	0.21 Pcnt	75 Pcnt
1765585504	67 Pkt	450 Pkt	0.21 Pcnt	75 Pcnt
1765585204	66 Pkt	450 Pkt	0.21 Pcnt	75 Pcnt
1765584904	64 Pkt	440 Pkt	0.21 Pcnt	75 Pcnt
1765584604	74 Pkt	450 Pkt	0.21 Pcnt	75 Pcnt
1765584305	67 Pkt	450 Pkt	0.21 Pcnt	75 Pcnt
1765584004	65 Pkt	440 Pkt	0.21 Pcnt	75 Pcnt
1765583704	65 Pkt	420 Pkt	0.21 Pcnt	75 Pcnt
1765583404	64 Pkt	420 Pkt	0.21 Pcnt	75 Pcnt
1765583104	70 Pkt	420 Pkt	0.21 Pcnt	75 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)