IU4BUQ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU4BUQ. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1787571355	13.5 Volt	450 Pkt	110 Pkt	70 Pcnt	26 C
1787571056	13.5 Volt	450 Pkt	110 Pkt	71 Pcnt	26 C
1787571055	13.5 Volt	450 Pkt	110 Pkt	71 Pcnt	26 C
1787570860	13.5 Volt	460 Pkt	110 Pkt	71 Pcnt	26 C
1787570456	13.5 Volt	460 Pkt	110 Pkt	70 Pcnt	26 C
1787570455	13.5 Volt	460 Pkt	110 Pkt	70 Pcnt	26 C
1787570155	13.5 Volt	480 Pkt	120 Pkt	70 Pcnt	26 C
1787569856	13.5 Volt	490 Pkt	130 Pkt	70 Pcnt	26 C
1787569855	13.5 Volt	490 Pkt	130 Pkt	70 Pcnt	26 C
1787569555	13.5 Volt	500 Pkt	130 Pkt	69 Pcnt	26 C
1787569256	13.5 Volt	480 Pkt	120 Pkt	69 Pcnt	26 C
1787569255	13.5 Volt	480 Pkt	120 Pkt	69 Pcnt	26 C
1787568657	13.5 Volt	510 Pkt	130 Pkt	69 Pcnt	26.5 C
1787568655	13.5 Volt	510 Pkt	130 Pkt	69 Pcnt	26.5 C
1787568355	13.5 Volt	530 Pkt	140 Pkt	69 Pcnt	26 C
1787568057	13.5 Volt	530 Pkt	140 Pkt	68 Pcnt	26 C
1787568055	13.5 Volt	530 Pkt	140 Pkt	68 Pcnt	26 C
1787567755	13.5 Volt	520 Pkt	140 Pkt	67 Pcnt	26 C
1787567456	13.5 Volt	530 Pkt	150 Pkt	67 Pcnt	26 C
1787567455	13.5 Volt	530 Pkt	150 Pkt	67 Pcnt	26 C
1787567155	13.5 Volt	530 Pkt	150 Pkt	67 Pcnt	26 C
1787566858	13.58 Volt	540 Pkt	140 Pkt	67 Pcnt	25.5 C
1787566855	13.58 Volt	540 Pkt	140 Pkt	67 Pcnt	25.5 C
1787566555	13.5 Volt	530 Pkt	130 Pkt	66 Pcnt	25.5 C
1787566256	13.5 Volt	520 Pkt	140 Pkt	65 Pcnt	25.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)