SR2ZFT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR2ZFT. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1780827720	13.8 Volt	460 Pkt	170 Pkt	83 Pcnt
1780827131	13.8 Volt	480 Pkt	180 Pkt	82 Pcnt
1780826518	13.8 Volt	510 Pkt	180 Pkt	81 Pcnt
1780825943	13.8 Volt	540 Pkt	180 Pkt	82 Pcnt
1780825330	13.8 Volt	540 Pkt	180 Pkt	82 Pcnt
1780824725	13.8 Volt	550 Pkt	200 Pkt	81 Pcnt
1780824135	13.8 Volt	540 Pkt	190 Pkt	82 Pcnt
1780823513	13.8 Volt	540 Pkt	190 Pkt	83 Pcnt
1780822918	13.8 Volt	530 Pkt	180 Pkt	83 Pcnt
1780822314	13.8 Volt	510 Pkt	170 Pkt	82 Pcnt
1780821712	13.8 Volt	510 Pkt	170 Pkt	83 Pcnt
1780821116	13.8 Volt	490 Pkt	160 Pkt	84 Pcnt
1780820513	13.8 Volt	490 Pkt	160 Pkt	86 Pcnt
1780819313	13.8 Volt	490 Pkt	160 Pkt	87 Pcnt
1780818709	13.8 Volt	470 Pkt	150 Pkt	87 Pcnt
1780818110	13.8 Volt	460 Pkt	150 Pkt	88 Pcnt
1780817507	13.8 Volt	470 Pkt	160 Pkt	88 Pcnt
1780816908	13.8 Volt	470 Pkt	160 Pkt	88 Pcnt
1780816307	13.8 Volt	460 Pkt	170 Pkt	87 Pcnt
1780815707	13.8 Volt	490 Pkt	180 Pkt	86 Pcnt
1780815105	13.8 Volt	510 Pkt	180 Pkt	84 Pcnt
1780814525	13.8 Volt	520 Pkt	180 Pkt	80 Pcnt
1780813918	13.8 Volt	520 Pkt	180 Pkt	78 Pcnt
1780813308	13.8 Volt	550 Pkt	180 Pkt	77 Pcnt
1780812712	13.8 Volt	570 Pkt	190 Pkt	77 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)