OK1KZE-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK1KZE-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1757469513	13.58 Volt	510 Pkt	150 Pkt	77 Pcnt
1757469213	13.58 Volt	510 Pkt	150 Pkt	76 Pcnt
1757469213	13.58 Volt	510 Pkt	150 Pkt	76 Pcnt
1757468913	13.58 Volt	490 Pkt	150 Pkt	75 Pcnt
1757468613	13.58 Volt	500 Pkt	150 Pkt	75 Pcnt
1757468313	13.58 Volt	500 Pkt	150 Pkt	76 Pcnt
1757468313	13.58 Volt	500 Pkt	150 Pkt	76 Pcnt
1757468013	13.58 Volt	520 Pkt	160 Pkt	77 Pcnt
1757467713	13.58 Volt	500 Pkt	150 Pkt	76 Pcnt
1757467413	13.58 Volt	500 Pkt	150 Pkt	76 Pcnt
1757467413	13.58 Volt	500 Pkt	150 Pkt	76 Pcnt
1757467113	13.43 Volt	490 Pkt	160 Pkt	76 Pcnt
1757466813	13.58 Volt	500 Pkt	160 Pkt	75 Pcnt
1757466513	13.58 Volt	500 Pkt	150 Pkt	75 Pcnt
1757466513	13.58 Volt	500 Pkt	150 Pkt	75 Pcnt
1757466213	13.58 Volt	490 Pkt	150 Pkt	75 Pcnt
1757465913	13.58 Volt	490 Pkt	150 Pkt	74 Pcnt
1757465613	13.58 Volt	490 Pkt	150 Pkt	74 Pcnt
1757465613	13.58 Volt	490 Pkt	150 Pkt	74 Pcnt
1757465313	13.58 Volt	500 Pkt	150 Pkt	76 Pcnt
1757465013	13.58 Volt	490 Pkt	140 Pkt	75 Pcnt
1757464713	13.58 Volt	490 Pkt	150 Pkt	76 Pcnt
1757464713	13.58 Volt	490 Pkt	150 Pkt	76 Pcnt
1757464413	13.58 Volt	500 Pkt	150 Pkt	76 Pcnt
1757464123	13.58 Volt	500 Pkt	150 Pkt	77 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)