This is the latest recevied telemetry packets stored in our database for station/object OE3TPB-20. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Press*
Temp.in*
Hum*
QNH*
Temp.out*
1753677823
979.3 hPa
24.9 C deg
61.8 %
1004 hPa
0 C deg
1753072534
977.5 hPa
23.2 C deg
53.9 %
1027.7 hPa
0 C deg
1753040986
977.8 hPa
36.1 C deg
34.9 %
1025.9 hPa
0 C deg
1753039186
977.8 hPa
36.1 C deg
35.5 %
1025.8 hPa
0 C deg
1753037386
977.5 hPa
35.9 C deg
36.4 %
1025.6 hPa
0 C deg
1753035586
977.7 hPa
35 C deg
36.9 %
1026 hPa
0 C deg
1753033787
977.7 hPa
34.6 C deg
36.7 %
1026 hPa
0 C deg
1753031985
977.6 hPa
34.7 C deg
37.2 %
1025.9 hPa
0 C deg
1753030185
977.6 hPa
35 C deg
37.5 %
1025.8 hPa
0 C deg
1753028385
977.8 hPa
35.4 C deg
38.3 %
1026 hPa
0 C deg
1753026585
978 hPa
35.7 C deg
39.7 %
1026.2 hPa
0 C deg
1753024784
978.2 hPa
35.5 C deg
41.9 %
1026.4 hPa
0 C deg
1753022983
978.4 hPa
26.2 C deg
45 %
1028.1 hPa
0 C deg
1753012466
979.7 hPa
24.4 C deg
57.8 %
1003.7 hPa
0 C deg
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)