VK2LJ-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2LJ-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Temp*
1781581179	14.42 Volts	29.05 Deg.C
1781580879	13.33 Volts	28.56 Deg.C
1781580580	13.33 Volts	28.56 Deg.C
1781580280	13.33 Volts	28.56 Deg.C
1781579981	13.3 Volts	28.07 Deg.C
1781579681	13.33 Volts	28.07 Deg.C
1781579382	13.33 Volts	28.07 Deg.C
1781579082	13.33 Volts	27.59 Deg.C
1781578783	13.33 Volts	27.59 Deg.C
1781577884	13.33 Volts	27.1 Deg.C
1781577585	13.33 Volts	26.61 Deg.C
1781577285	13.33 Volts	26.61 Deg.C
1781576987	13.33 Volts	26.61 Deg.C
1781576686	13.33 Volts	26.12 Deg.C
1781576387	13.33 Volts	26.12 Deg.C
1781576087	13.33 Volts	25.63 Deg.C
1781575788	13.33 Volts	25.63 Deg.C
1781575489	13.33 Volts	25.63 Deg.C
1781575189	13.33 Volts	25.63 Deg.C
1781574890	13.33 Volts	25.63 Deg.C
1781574590	13.33 Volts	25.14 Deg.C
1781574291	13.33 Volts	25.14 Deg.C
1781573993	13.33 Volts	25.14 Deg.C
1781573692	13.33 Volts	25.14 Deg.C
1781573393	13.33 Volts	25.14 Deg.C

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.489, -273.15

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)