DK7JL-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DK7JL-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPUTemp*	DiskUsage*
1761502203	42 deg.C	27 %
1761495003	42 deg.C	27 %
1761491403	42 deg.C	27 %
1761477003	42 deg.C	27 %
1761466203	42 deg.C	27 %
1761459003	42 deg.C	27 %
1761451803	42 deg.C	27 %
1761448204	43 deg.C	27 %
1761433803	44 deg.C	27 %
1761423003	44 deg.C	27 %
1761412203	43 deg.C	27 %
1761408603	44 deg.C	27 %
1761401403	43 deg.C	27 %
1761397803	43 deg.C	27 %
1761394203	43 deg.C	27 %
1761390604	43 deg.C	27 %
1761387003	43 deg.C	27 %
1761383407	43 deg.C	27 %
1761379804	43 deg.C	27 %
1761376203	43 deg.C	27 %
1761372603	43 deg.C	27 %
1761369003	44 deg.C	27 %
1761365403	44 deg.C	27 %
1761361809	44 deg.C	27 %
1761358203	44 deg.C	27 %

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

DiskUsage: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)