UR7D-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object UR7D-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1781408625	12.75 Volt	170 Pkt	90 Pkt	89 Pcnt
1781408024	12.75 Volt	180 Pkt	90 Pkt	87 Pcnt
1781407424	12.75 Volt	180 Pkt	90 Pkt	86 Pcnt
1781406825	12.75 Volt	190 Pkt	100 Pkt	86 Pcnt
1781406222	12.75 Volt	200 Pkt	110 Pkt	86 Pcnt
1781405622	12.75 Volt	200 Pkt	110 Pkt	89 Pcnt
1781405021	12.75 Volt	200 Pkt	110 Pkt	91 Pcnt
1781404421	12.75 Volt	200 Pkt	110 Pkt	92 Pcnt
1781403820	12.75 Volt	210 Pkt	110 Pkt	95 Pcnt
1781403220	12.75 Volt	200 Pkt	110 Pkt	95 Pcnt
1781402619	12.75 Volt	200 Pkt	110 Pkt	95 Pcnt
1781402018	12.75 Volt	200 Pkt	110 Pkt	94 Pcnt
1781401418	12.75 Volt	200 Pkt	110 Pkt	96 Pcnt
1781400817	12.75 Volt	210 Pkt	120 Pkt	97 Pcnt
1781400217	12.75 Volt	200 Pkt	110 Pkt	97 Pcnt
1781399616	12.75 Volt	200 Pkt	110 Pkt	98 Pcnt
1781399016	12.75 Volt	190 Pkt	100 Pkt	99 Pcnt
1781398415	12.75 Volt	180 Pkt	100 Pkt	99 Pcnt
1781397814	12.75 Volt	180 Pkt	100 Pkt	98 Pcnt
1781397214	12.75 Volt	160 Pkt	90 Pkt	98 Pcnt
1781396013	12.75 Volt	150 Pkt	90 Pkt	98 Pcnt
1781395412	12.75 Volt	140 Pkt	90 Pkt	97 Pcnt
1781394812	12.75 Volt	150 Pkt	100 Pkt	97 Pcnt
1781394211	12.75 Volt	150 Pkt	100 Pkt	98 Pcnt
1781393611	12.75 Volt	160 Pkt	100 Pkt	98 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)